Lexus NX: 2ar-fxe (fuel)
Lexus NX Service Manual / Engine & Hybrid System / 2ar-fxe (fuel)
- Fuel Injector
- Fuel Pressure Regulator
- Fuel Pump
- Fuel Pump Ecu
- Fuel Sender Gauge Assembly
- Fuel System
- Fuel Tank
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 FUEL DELIVERY PIPE *2 FUEL INJECTOR ASSEMBLY *3 FUEL TUBE SUB-ASSEMBLY *4 INJECTOR VIBRATION INSULATOR *5 FUEL DELIVERY PIPE SPACER *6 O-RING
Removal
REMOVAL PROCEDURE 1. DISCONNECT INTAKE MANIFOLD Click here 2. DISCONNECT FUEL TUBE SUB-ASSEMBLY (a) Remove the No. 1 fuel pipe clamp from the fuel tube sub-assembly. Click here (b) Disconnec
SEE MORE:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspect
Oxygen (A/F) Sensor Signal Stuck Lean (Bank 1 Sensor 1) (P2195,P2196)
DESCRIPTION HINT: Although the DTC titles say oxygen sensor, these DTCs relate to the air fuel ratio sensor. The air fuel ratio sensor generates voltage* that corresponds to the actual air fuel ratio. This sensor voltage is used to provide the ECM with feedback so that it can control the air fuel ra
© 2016-2026 Copyright www.lexunx.com
