Lexus NX: Cellular Phone Registration Failure
CAUTION / NOTICE / HINT
NOTICE:
When replacing the radio receiver assembly, always replace it with a new one.
If a radio receiver assembly which was installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The radio receiver assembly may not operate normally.
HINT:
- If the operation of a cellular phone or the radio receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
-
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Click here
.gif)
PROCEDURE
| 1. | CHECK USAGE CONDITION |
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
- The cellular phone is "Bluetooth" compatible (refer to http://www.lexus.com/MobileLink/).
- "Bluetooth" setting of the cellular phone is on.
- Operating system and software of the cellular phone are the latest versions.
- There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
(b) Register the cellular phone again and check if it is registered correctly.
HINT:
If operation of the cellular phone or radio receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
| Result | Proceed to |
|---|---|
| Cellular phone can be registered | A |
| Cellular phone cannot be registered | B |
| A | .gif) | END |
|
.gif)
| 2. | RESTART CELLULAR PHONE |
(a) Restart the cellular phone.
(b) Turn the power switch off.
(c) Turn the power switch on (ACC).
(d) Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or radio receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
| Result | Proceed to |
|---|---|
| Cellular phone can be registered | A |
| Cellular phone cannot be registered | B |
| A | | END |
|
| 3. | BRING CELLULAR PHONE NEAR IN-VEHICLE DEVICE |
(a) Place the cellular phone close to the radio receiver assembly.
(b) Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or radio receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
| Result | Proceed to |
|---|---|
| Cellular phone can be registered | A |
| Cellular phone cannot be registered | B |
| A | | END |
|
| 4. | CLEAR REGISTERED DEVICE INFORMATION |
(a) Clear all "Bluetooth" devices registered to the cellular phone and radio receiver assembly.
(b) Register the cellular phone as a connected device again and check if it is registered correctly.
HINT:
If operation of the cellular phone or radio receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
| Result | Proceed to |
|---|---|
| Cellular phone can be registered | A |
| Cellular phone cannot be registered | B |
| A | | END |
|
| 5. | CHECK USING ANOTHER VEHICLE |
(a) Check if the cellular phone can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.
HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
- If operation of the cellular phone or radio receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
| Result | Proceed to |
|---|---|
| Cellular phone can be registered | A |
| Cellular phone cannot be registered | B |
| A | | REPLACE RADIO RECEIVER ASSEMBLY |
|
| 6. | CHECK USING ANOTHER CELLULAR PHONE |
(a) Using another "Bluetooth" compatible cellular phone, register the cellular phone and check that it is registered correctly.
HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
- If operation of the cellular phone or radio receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
| Result | Proceed to |
|---|---|
| Cellular phone can be registered | A |
| Cellular phone cannot be registered | B |
| A | | END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED) |
| B | | REPLACE RADIO RECEIVER ASSEMBLY |
READ NEXT:
Cellular Phone Inspection
CAUTION / NOTICE / HINT HINT: If the operation of a cellular phone or the radio receiver assembly is requested, make sure to follow the instructions closely and perform the operation. PROCEDURE 1.
Sound of Portable Player cannot be Heard from Speakers or Sound is Low
PROCEDURE 1. CHECK PORTABLE PLAYER SETTINGS (a) Check the portable player settings. (1) Check that the volume is not set to "0". (2) Check that mute is off. (b) Check that the sound of the po
Does not Play even after Bluetooth Audio Mode is Selected
CAUTION / NOTICE / HINT NOTICE: When replacing the radio receiver assembly, always replace it with a new one. If a radio receiver assembly which was installed to another vehicle is used, the following
SEE MORE:
Security Horn Circuit
DESCRIPTION When the theft deterrent system is switched from the armed state to the alarm sounding state, the main body ECU (multiplex network body ECU) transmits a signal to cause the security horn to sound at intervals of 0.4 seconds. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE:
Inspect the
Short in Curtain Shield Airbag (LH) Squib Circuit (B1835-B1838)
DESCRIPTION The curtain shield squib LH circuit consists of the airbag ECU assembly and curtain shield airbag assembly LH. The circuit instructs the SRS to deploy when deployment conditions are met. These DTCs are stored when a malfunction is detected in the curtain shield squib LH circuit. DTC N
