Lexus NX: Components
COMPONENTS
ILLUSTRATION
| *1 | FORWARD RECOGNITION CAMERA | *2 | FORWARD RECOGNITION LATCH |
| *3 | NO. 1 FORWARD RECOGNITION COVER | *4 | NO. 2 FORWARD RECOGNITION COVER |
READ NEXT:
Removal
REMOVAL CAUTION / NOTICE / HINT NOTICE:
When replacing the forward recognition camera, replace it with a new one.
Replace the forward recognition camera if there is any foreign matter on the came
Installation
INSTALLATION PROCEDURE 1. INSTALL FORWARD RECOGNITION CAMERA NOTICE:
When replacing the forward recognition camera, replace it with a new one.
If the forward recognition camera has been struck or
Before Starting Adjustment
BEFORE STARTING ADJUSTMENT CAUTION / NOTICE / HINT NOTICE: When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Lexus genuine part. If a non-
SEE MORE:
Short in Motor Circuit (C1521,C1531-C1534)
DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition C1521 Short in Motor Circuit Motor overcurrent Power steering ECU assembly On Power switch on (IG) again C1531 ECU Malfunction ECU internal malfuncti
Removal
REMOVAL CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. PROCEDURE 1. REMOVE REAR SEAT CUSHION ASSEMBLY Click here 2. REMOVE BENCH TYPE REAR SEAT CUSHION COVER (REAR SEAT CUSHION HEATER) (a) Remove the 6 hog rings. (b) Remov
© 2016-2026 Copyright www.lexunx.com
