Lexus NX: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE LIGHTING SYSTEM (EXT)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
HINT:
The following items can be customized.
(a) Customizing with the Techstream.
(1) Connect the Techstream to the DLC3.
(2) Turn the power switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Utility / Customize / (desired system).
(5) Select the setting by referring to the table below.
Light Control| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Disp Ex ON Sen | Sets the display light (meter, audio, etc.) dim starting level.*A | NORMAL | 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 | Main body ECU (Multiplex network body ECU) |
| Disp Ex OFF Sen | Sets the display light (meter, audio, etc.) dim return level.*B | NORMAL | 000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 | Main body ECU (Multiplex network body ECU) |
| Light Auto OFF Delay | Keep the headlights on for a certain period of time after turning the power switch off and closing all doors with the low beam headlights on. | 30 s | 00:OFF,01:30 s,10:60 s,11:90 s | Main body ECU (Multiplex network body ECU) |
| Sensitivity | Adjusts the ambient light sensitivity of the automatic light control system.*C | Normal | 000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 | Main body ECU (Multiplex network body ECU) |
| DRL Function | ON/OFF of the DRL function* | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Light up Clearance Lights at Door Unlock Function | Turns on the clearance lights, taillights and the license plate lights for 15 seconds when the doors are unlocked by the smart key or the wireless key. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
- *: Vehicles displaying the Item "DRL Function" on the Techstream
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Lane Change Flashing Times Setting | Function to change the lane change flashing times. | 3 | 000:OFF,001:3,010:4,011:5,100:6,101:7 | Combination meter assembly |
HINT:
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
*A
.png)
HINT:
When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.
*B
HINT:
When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.
*C
.png)
HINT:
When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.
(b) Customizing with Multi-display.
(1) Turn the power switch on (IG).
(2) Enter the following menus: Setup / Vehicle Customization / Lights Settings.
(3) Select the setting by referring to the table below.
Lights Settings| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Light Sensor sensitivity | Adjusts the sensitivity of the automatic light control system.*A | 0 | -2, -1, 0, +1 or +2 | Main body ECU (multiplex network body ECU) |
| Headlamps Auto-Off Timer | Keeps the headlights on for a certain period of time after turning the power switch off and closing all of doors with the low beam headlights on. | 30 sec. | Off, 30 sec., 60 sec. or 90 sec. | Main body ECU (multiplex network body ECU) |
| Daytime Running Lights* | Turns the DRL function on/off. | On | On or Off | Main body ECU (multiplex network body ECU) |
- *: Vehicles displaying the Item "Daytime Running Lights" on the multi-information display
HINT:
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
*A
.png)
HINT:
When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.
READ NEXT:
Initialization
INITIALIZATION NOTICE:
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during headlight
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE:
Recognition code registration is necessary when replacing the main body ECU (multiplex network body ECU).
If the main body ECU (multiplex network body ECU) is repla
Terminals Of Ecu
TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY, MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction
SEE MORE:
Removal
REMOVAL PROCEDURE 1. REMOVE DECK BOARD ASSEMBLY Click here 2. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY Click here 3. REMOVE REAR DECK FLOOR BOX Click here 4. REMOVE DECK FLOOR BOX LH Click here 5. PRECAUTION CAUTION: Be sure to read Precaution thoroughly before serving. Click here NOTICE: Afte
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Front Radar Sensor System DTC No. Detection Item Link C1A1100 Front Radar Sensor Optical Axis Misalignment Malfunction C1A8C46 Main Microcomputer in Front Radar Sensor Calibration/Parameter Memory Failure C1A8D1C Power Supply Circuit i
