Lexus NX: Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the power switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Wireless Door Lock.

(5) Select the setting by referring to the table below.

Wireless Door Lock

Tester Display

Description

Default

Setting

ECU

Wireless Control

Function that turns the wireless door lock control system on or off

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Hazard Answer Back

When the doors are locked by wireless operation, the hazard warning lights flash once.

When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Open Door Warning

The buzzer sounds when lock is pressed when any of the doors are ajar.

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Unlock 2 Operation

Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Panic Function

Function to operate theft deterrent system by pressing panic switch on electrical key transmitter sub-assembly for 0.8 seconds.

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Auto Lock Time

Function that regulates the interval between unlocking and automatic relocking of doors

60 s

00:30 s,01:60 s,10:120 s

Main body ECU (Multiplex network body ECU)

Wireless Buzzer Resp

Wireless door lock buzzer response.

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

P/W Wireless Ope Buzz

Wireless power window buzzer response.

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Wireless Buzzer Vol

Wireless door lock buzzer volume.

Level5

0000:Level7,0001:Level6,0010:Level5,0011:Level4,0100:Level3,0101:Level2,0110:Level1,0111:Level0

Main body ECU (Multiplex network body ECU)

(b) Customizing with the Multi-display

(1) Turn the power switch on (IG).

(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings.

(3) Select the setting by referring to the table below.

Display

Default

Content

Setting

Relevant ECU

Remote 2-Press Unlock

ON

Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock.

On or Off

Main body ECU (Multiplex network body ECU)

Auto Relock Timer

60 s

Function that regulates the interval between unlocking and automatic relocking of doors

Off, 30 sec., 60 sec. or 120 sec.

Main body ECU (Multiplex network body ECU)

Lock/Unlock Feedback-Lights

On

When the doors are locked by wireless operation, the hazard warning lights flash once.

When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

On or Off

Main body ECU (Multiplex network body ECU)

Lock/Unlock Feedback-Tone

5 bars

Wireless door lock buzzer volume

Off, 1, 2, 3, 4, 5, 6 or 7

Main body ECU (Multiplex network body ECU)

READ NEXT:

 Problem Symptoms Table

PROBLEM SYMPTOMS TABLE NOTICE: If the main body ECU (multiplex network body ECU) is replaced, refer to the Smart Access System with Push-button Start (for Entry Function). Click here HINT: Use t

 Terminals Of Ecu

TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) *1 Main Body ECU (Multiplex Network Body ECU) - - (a) Remove the main body E

 Diagnosis System

DIAGNOSIS SYSTEM DESCRIPTION The ECU stores DTCs when malfunctions occur. The diagnostic system allows for reading of the DTCs from the DLC3. Use the Techstream to check for malfunctions and perform r

SEE MORE:

 Portable Player cannot be Connected Manually/Automatically

CAUTION / NOTICE / HINT HINT: Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if the portable audio player itself can play files. Click here PROCEDURE 1. CHECK CONNECTED DEVICE SETTINGS

 Fail-safe Chart

FAIL-SAFE CHART HINT: If the power source voltage to the multiplex tilt and telescopic ECU returns to normal within 10 seconds during tilt or telescopic operation, the operation will be resumed. If it returns to normal after 10 seconds have elapsed, the operation restarts when a tilt or telescopic o

© 2016-2025 Copyright www.lexunx.com