Lexus NX: Front Evaporator Temperature Sensor

Lexus NX Service Manual / Vehicle Interior / Heating / Air Conditioning / Front Evaporator Temperature Sensor

READ NEXT:

 Components

COMPONENTS ILLUSTRATION *1 COOLER EXPANSION VALVE *2 NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY *3 NO. 1 COOLER THERMISTOR *4 UPPER HEATER CASE *5 LOWER HEATER CASE *6 O-RING

 Removal

REMOVAL PROCEDURE 1. REMOVE AIR CONDITIONING RADIATOR ASSEMBLY Click here 2. REMOVE QUICK HEATER ASSEMBLY Click here 3. REMOVE COOLER EXPANSION VALVE Click here 4. REMOVE NO. 1 COOLER EVAPORA

 Installation

INSTALLATION PROCEDURE 1. INSTALL NO. 1 COOLER THERMISTOR (a) Install the No. 1 cooler thermistor as shown in the illustration. NOTICE: Be sure to insert the thermistor only once because reins

SEE MORE:

 Installation

INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL REAR DRIVE SHAFT ASSEMBLY LH (a) Align the matchmarks on the rear drive shaft assembly LH and rear axle hub and bearing assembly,

 If a warning message is displayed

The multi-information display shows warnings of system malfunctions, incorrectly performed operations, and messages that indicate a need for maintenance. When a message is shown, perform the correction procedure appropriate to the message. Master warning light The master warning ligh

© 2016-2025 Copyright www.lexunx.com