Lexus NX: How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
- Use this procedure to troubleshoot the theft deterrent system.
- *: Use the Techstream.
PROCEDURE
| 1. | VEHICLE BROUGHT TO WORKSHOP |
|
.gif)
| 2. | CUSTOMER PROBLEM ANALYSIS |
(a) Interview the customer to confirm the trouble.
Click here .gif)
|
| 3. | SYMPTOM SIMULATION |
|
| 4. | INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM* |
(a) Use the Techstream to check if the CAN communication system is functioning normally.
Click here
| CAN communication system DTC is output | .gif) | GO TO CAN COMMUNICATION SYSTEM |
|
| 5. | INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM* |
(a) Use the Techstream to check if the LIN communication system is functioning normally.
Click here
| LIN communication system DTC is output | | GO TO LIN COMMUNICATION SYSTEM |
|
| 6. | CHECK POWER DOOR LOCK CONTROL SYSTEM |
(a) Refer to the power door lock control system.
Click here
| Power door lock control system is abnormal | | GO TO POWER DOOR LOCK CONTROL SYSTEM |
|
| 7. | CHECK WIRELESS DOOR LOCK CONTROL SYSTEM |
(a) Refer to the wireless door lock control system.
Click here
| Result | Proceed to |
|---|---|
| Wireless door lock control system is normal | A |
| Wireless door lock control system is abnormal | B |
| B | | GO TO WIRELESS DOOR LOCK CONTROL SYSTEM |
|
| 8. | CHECK SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Entry Function) |
(a) Refer to the smart access system with push-button start (for Entry Function).
Click here
| Result | Proceed to |
|---|---|
| Smart access system with push-button start (for Entry Function) is normal | A |
| Smart access system with push-button start (for Entry Function) is abnormal | B |
| B | | GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Entry Function) |
|
| 9. | CHECK SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function) |
(a) Refer to the smart access system with push-button start (for Start Function).
Click here
| Result | Proceed to |
|---|---|
| Smart access system with push-button start (for Start Function) is normal | A |
| Smart access system with push-button start (for Start Function) is abnormal | B |
| B | | GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function) |
|
| 10. | CHECK IMMOBILISER SYSTEM |
(a) Refer to the immobiliser system.
Click here
| Immobiliser system is abnormal | | GO TO IMMOBILISER SYSTEM |
|
| 11. | CHECK LIGHTING SYSTEM (EXT) |
(a) Refer to the lighting system (EXT).
-
for Triple Beam Headlight
Click here
-
for Single Beam Headlight
Click here
| Result | Proceed to |
|---|---|
| Lighting system (EXT) is normal | A |
| Lighting system (EXT) is abnormal (for Triple Beam Headlight) | B |
| Lighting system (EXT) is abnormal (for Single Beam Headlight) | C |
| B | | GO TO LIGHTING SYSTEM (EXT) |
| C | | GO TO LIGHTING SYSTEM (EXT) |
|
| 12. | CHECK LIGHTING SYSTEM (INT) |
(a) Refer to the lighting system (INT).
Click here
| Lighting system (INT) is normal (w/o Power Back Door System) | | GO TO STEP 14 |
| Lighting system (INT) is abnormal | | GO TO LIGHTING SYSTEM (INT) |
|
| 13. | CHECK POWER BACK DOOR SYSTEM |
(a) Refer to the power back door system.
Click here
| Power back door closer system is abnormal | | GO TO POWER BACK DOOR SYSTEM |
|
| 14. | CHECK HORN SYSTEM |
(a) Refer to the horn system.
Click here
| Horn system is abnormal | | GO TO HORN SYSTEM |
|
| 15. | PROBLEM SYMPTOMS TABLE |
(a) Refer to Problem Symptoms Table.
Click here
| Fault is listed in Problem Symptoms Table | | ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE |
|
| 16. | PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM* |
(a) System Description.
Click here
(b) Terminals of ECU.
Click here
(c) Data List / Active Test.
Click here
|
| 17. | ADJUST, REPAIR OR REPLACE |
|
| 18. | CONFIRM TEST |
| NEXT | | END |
READ NEXT:
Customize Parameters
CUSTOMIZE PARAMETERS INSTALL CUSTOMIZE THEFT DETERRENT SYSTEM HINT: The following items can be customized. NOTICE:
When the customer requests a change in a function, first make sure that the functi
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT:
Troubleshooting of the theft deterrent system is based on the premise that the power door lock control system and the wireless door lock control system are operating no
Terminals Of Ecu
TERMINALS OF ECU *1 Main body ECU (multiplex network body ECU) - - CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (a) Remove the main body E
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSPECT COMPRESSOR OIL (a) When replacing the compressor assembly with motor with a new one, gradually discharge the inert gas from the service valve, and drain the following amount of oil from the new compressor assembly with motor before installation. Standard: (Oil c
Glass Temperature Sensor Circuit (B14A8)
DESCRIPTION The air conditioning amplifier assembly detects the windshield glass surface temperature from this circuit. The air conditioning amplifier assembly applies voltage to the air conditioning thermistor assembly (glass temperature sensor). As the windshield glass surface temperature rises, t
