Lexus NX: Multi-information display

The multi-information display presents the driver with a variety of vehicle data.

Display and menu icons

■ Display

■ Menu icons

Drive information

Navigation system-linked display (if equipped)

Audio system-linked display (if equipped)

Driving assist system information

Warning message display

Settings display

NOTICE

■The multi-information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed.

Changing the meter display

The multi-information display is operated using the meter control switches.

1. Select an item/change pages
2. Enter/set
3. Return to the previous screen
4. Press: Displays the screen registered to When no screen has been registered, the drive information screen will be displayed. Press and hold: Registers the currently displayed screen to

The registration confirmation screen is displayed.

If the selected screen cannot be registered, a registration failure message will be shown.

5. Call sending/receiving and history display

Linked with the hands-free system, sending or receiving call is displayed. For details regarding the hands-free system, refer to the "NAVIGATION AND MULTIMEDIA SYSTEM OWNER'S MANUAL".

Drive information

■ Content displayed as drive information Select to display various drive data.

Items displayed can be switched by pressing or of the meter control switches to select and pressing or .

• Current fuel consumption*1
  Displays the current rate of fuel consumption

• Average fuel consumption (after reset*2/after start/after refuel)*1
  Displays the average fuel consumption since the function was reset, the hybrid system was started, and the vehicle was refueled, respectively
  Use the displayed average fuel consumption as a reference.

• Average vehicle speed (after reset*2/after start)*1
  Displays the average vehicle speed since the function was reset and the hybrid system was started, respectively

• Elapsed time (after reset*2/after start)*1
  Displays the elapsed time since the function was reset and the hybrid system was started, respectively

• Distance (driving range/after start)*1
  Displays the estimated maximum distance that can be driven with the quantity of fuel remaining and the distance driven after the hybrid system was started respectively.

  • This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.

  • When only a small amount of fuel is added to the tank, the display may not be updated.

    When refueling, turn the power switch off. If the vehicle is refueled without turning the power switch off, the display may not be updated.

*1: Displayed when the item is set in "Drive Info 1", "Drive Info 2" and "Drive Info 3".
*2: The function can be reset by pressing the of the meter control switches for longer than 1 second when the item to reset is displayed.

If there is more than one item that can be reset, the item selection screen will appear.

■ Speedometer Displays the vehicle speed.

■ Tire inflation pressure Displays inflation pressure of each tire.

The inflation pressure of the spare tire will not be displayed.

■ Vehicle sway warning Detects the sway of the vehicle within a lane, which is often associated with a decrease in the driver's attention level, and displays the decrease in attention using a bar display.

The shorter the bar length, the more the driver may need to rest.

This display is a part of the LTA (Lane Tracing Assist) system or LDA (Lane Departure Alert with steering control) system. The display is enabled when the operating conditions of the vehicle sway warning are met.

■ Display off A blank screen is displayed.

■Tire inflation pressure

• It may take a few minutes to display the tire inflation pressure after the power switch is turned to ON mode. It may also take a few minutes to display the tire inflation pressure after inflation pressure has been adjusted.

• "--" may be displayed if the tire information cannot be determined due to unfavorable radio wave conditions.

• Tire inflation pressure changes with temperature.

  The displayed values may also be different from the values measured using a tire pressure gauge.

■When disconnecting and reconnecting 12-volt battery terminals The drive information will be reset.

Navigation system-linked display (if equipped)

Select to display the following navigation system-linked information.

• Route guidance

• Compass display (heading-up display)

Audio system-linked display

Select to enable selection of an audio source or track on the display using the meter control switches.

Driving assist system information

Select to display the operational status of the following systems:

• LTA (Lane Tracing Assist)

• LDA (Lane Departure Alert with steering control)

• Dynamic radar cruise control with full-speed range

• RSA (Road Sign Assist)

The displayed icon changes depending on the system used.

Warning message display

Select to display warning messages and measures to be taken if a malfunction is detected.

Settings display

The settings of the following items can be changed using the meter control switches.

For functions that can be enabled or disabled, the function switches between on and off each time is pressed.

■ LTA (Lane Tracing Assist) (if equipped)

Select to set up the following items.

• Lane centering

Select to enable/disable the lane centering function.

• Steering Assist

Select to enable/disable steering wheel assistance.

• Alert

Select to change the alert types.

• Alert sensitivity

Select to set the warning sensitivity.

• Sway warning

Select to enable/disable the vehicle sway warning.

• Sway sensitivity

Select to set the vehicle sway warning sensitivity.

■ LDA (Lane Departure Alert with steering control) (if equipped)

Select to set up the following items.

• Steering Assist

Select to enable/disable steering wheel assistance.

• Alert

Select to change the alert types.

• Alert sensitivity

Select to set the warning sensitivity.

• Sway warning

Select to enable/disable the vehicle sway warning.

• Sway sensitivity

Select to set the vehicle sway warning sensitivity.

■ PCS (Pre-Collision System)

Select to set up the following items.

• PCS on/off

Select to enable/disable the pre-collision system.

• PCS sensitivity

Select to change the warning timing.

■ PKSA (Parking Support Alert) (if equipped)

Select to set up the following items.

• Intuitive parking assist sensor

Select to enable/disable the intuitive parking assist sensor.

• Volume

Select to set the volume of the buzzer which sounds when the parking support alert is operated.

■ PKSB (Parking Support Brake function) (if equipped)

• PKSB on/off

Select to enable/disable the parking support brake function (for static objects).

■ RSA (Road Sign Assist) (if equipped)

Select to set up the following items.

• Road Sign Assist

Select to enable/disable road sign assist.

• Over Speed

Select to set the over speed alert on/off.

• Level of Over Speed

Select to set the over speed alert level.

• Others

Select to set the other road sign assist.

■ Clock Select to switch between 12-hour display and 24-hour display.

■ Vehicle Settings

• PBD (Power Back Door)*1

Select to set up the following items.

• System settings

Select to enable/disable the power back door system.

• Volume

Select to set the volume of the buzzer which sounds when the power back door system.

• Kick Sensor*2

Select to enable/disable the kick sensor.

*1: Vehicles with power back door
*2: Vehicles with Hands Free Power Back Door

• TPMS (Tire Pressure Warning System)

Select to initialize the tire pressure warning system.

• Scheduled Maintenance

Select to initialize the scheduled maintenance.

• Oil maintenance

Select to reset the engine oil maintenance information (message indicating maintenance is required and distance until the next oil change) after engine oil maintenance is performed.

■ Meter settings

• Language

Select to change the language on the display.

• Units

Select to change the unit of measure for fuel consumption.

• EV Indicator

Select to set the EV indicator on/off.

• Switch settings

Displays a procedure to register a desired screen to .

You can register 1 screen as a shortcut, which can be displayed by pressing .

• Drive information screen

Select to choose between 2 items that will be displayed on each drive information screen ("Drive info 1", "Drive info 2" and "Drive info 3") respectively.

• Pop-up display

Select to set the following pop-up displays, which may appear in some situations, on/off.

• Intersection guidance display of the navigation system-linked system
• Incoming call display of the hands-free phone system
• Instrument panel brightness adjustment display

• Accent color

Select to change the accent colors on the screen, such as the cursor color.

• Tachometer settings

Select to set the display of the tachometer or Hybrid System Indicator to automatically change according to the driving mode or static.

• Initialization

Select to reset the meter display settings.

■Suspension of the settings display In the following situations, the settings display using the meter control switches will be suspended.

• When a warning message appears on the multi-information display
• When the vehicle begins to move

WARNING

■Cautions during setting up the display As the hybrid system needs to be operating during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.

NOTICE

■During setting up the display To prevent 12-volt battery discharge, ensure that the hybrid system is operating while setting up the display features.

Intuitive parking assist (if equipped)

Automatically displayed when the system is used.

READ NEXT: