Lexus NX: Opening, closing and locking the doors
Lexus NX Owners Manual / Before driving / Opening, closing and locking the
doors
READ NEXT:
Side doors
The vehicle can be locked and
unlocked using the entry function,
wireless remote control or door
lock switch.
Unlocking and locking the doors
from the outside
■ Using the smart access system w
Back door
The back door can be opened using
the back door open switch, smart
access system with push-button
start or wireless remote control.
WARNING
■Caution while driving
Keep the back door closed
Smart access system with push-button
start
The following operations can be
performed simply by carrying the
electronic key (including the card
key) on your person, for example in
your pocket. The driver should
always carry the electronic
SEE MORE:
Internal Control Module Software Incompatibility Not Programmed (U030051)
DESCRIPTION If the forward recognition camera cannot verify the vehicle information sent from the hybrid vehicle control ECU, the forward recognition camera stores DTC U030051. DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from U030051 Internal Control Modul
Installation
INSTALLATION PROCEDURE 1. INSTALL SHIFT LEVER POSITION SENSOR (a) Install the shift lever position sensor to the manual valve shaft. (b) Temporarily install the 2 bolts. (c) Install the lock plate and tighten the lock nut. Torque: 6.9 N·m {70 kgf·cm, 61 in·lbf} (d) Temporarily install the contro
© 2016-2026 Copyright www.lexunx.com
