Lexus NX: Other interior features

Sun visors

1. To set the visor in the forward position, flip it down.
2. To set the visor in the side position, flip down, unhook, and swing it to the side.
3. To use the side extender, place the visor in the side position, then slide it backward.

Vanity mirrors

■ Sun visors Slide the cover to open.

The light turns on when the cover is opened.

■ Auxiliary box Remove the lid of auxiliary box using the strap A.

There is a vanity mirror on the back side of the lid.

■Automatic light off to prevent 12-volt battery discharge If the vanity lights remain on when the power switch is turned off, the lights will go off automatically after 20 minutes.

NOTICE

■To prevent damage to the vanity mirror When the lid of auxiliary box is removed, do not subject it to strong impacts or set heavy objects on top of it.

■To prevent 12-volt battery discharge Do not leave the vanity lights on longer than necessary when the hybrid system is off.

Clock

The GPS clock's time is automatically adjusted by utilizing GPS time information.

For details, refer to the "NAVIGATION AND MULTIMEDIA SYSTEM OWNER'S MANUAL".

Power outlet (12 VDC)

Please use a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W).

When using electronic goods, make sure that the power consumption of all the connected power outlets is less than 120 W.

■ Console box Open the lid.

■ Luggage compartment Open the lid.

■The power outlet can be used when The power switch is in ACCESSORY or ON mode.

■When stopping the hybrid system Disconnect electrical devices with charging functions, such as mobile battery packs. If such devices are left connected, the hybrid system may not stop normally.

■Using power outlet The notch in console box allows power cables to be passed through even when the console box is closed.

NOTICE

■When power outlet is not in use To avoid damaging the power outlet, close the power outlet lid when the power outlet is not in use.

■To prevent 12-volt battery discharge Do not use the power outlet longer than necessary when the hybrid system is off.

Power outlet (120 VAC) (if equipped)

Please use a power supply for electronic goods that use less than 120 VAC (power consumption of 100 W).

Open the lid.

■The power outlet can be used when The power switch is in ON mode.

NOTICE

■When power outlet (120 VAC) is not in use To avoid damaging the power outlet, close the power outlet lid when the power outlet is not in use.

■To prevent battery discharge Do not use the power outlet longer than necessary when the hybrid system is off.

■Appliances that may not operate properly The following 120 VAC appliances may not operate properly even if their power consumption is under 100 W:

• Appliances with high initial peak wattage
• Measuring devices that process precise data
• Other appliances that require an extremely stable power supply

Wireless charger (if equipped)

A portable device can be charged by just placing Qi standard wireless charge compatible portable devices according to the Wireless Power Consortium, such as smart phones and mobile batteries, etc., on the charge area.

This function cannot be used with portable devices that are larger than the charging area. Also, depending on the portable device, it may not operate as normal. Please read the operation manual for portable devices to be used.

■ The "Qi" symbol The "Qi" symbol is a trademark of the Wireless Power Consortium.

■ Name for all parts

1. Power supply switch
2. Operation indicator light
3. Charge area

■ Using the wireless charger

1. Open the console box. 2. Press the power supply switch of the wireless charger.

Switches on and off with each press of the power supply switch.

When turned on, the operation indicator light (green) comes on.

Even with the hybrid system off, the on/off state of the power supply switch is memorized.

3. Place the charging side of the portable device down.

When charging, the operation indicator light (orange) comes on.

If charging is not occurring, try placing the portable device as close to the center of the charging area as possible.

When charging is complete, the operation indicator light (green) comes on.

• Recharging function
  • When charging is complete and after a fixed time in the charge suspension state, charging restarts.
  • When the portable device is moved, charging is stopped for a moment and then it restarts.

■ Lighting conditions of operation indicator light

*: Depending on the portable device, there are cases where the operation indicator light will continue being lit up orange even after the charging is complete.

• When the operation indicator light flashes

When an error occurs, the operation indicator light flashes an orange color. Handle the error based on the following tables.

• Flashing repeatedly once every second (Orange)

• Repeatedly flashes 3 times continuously (Orange)

• Repeatedly flashes 4 times continuously (Orange)

■The wireless charger can be operated when The power switch is in ACCESSORY or ON mode.

■Usable portable devices

• Qi standard wireless charge standard can be used on compatible devices.

  However, not all Qi standard devices and compatibility are guaranteed.

• Starting with mobile phones and smart phones, it is aimed for low power electrically supplied portable devices of no more than 5W.

■When covers and accessories are attached to portable devices Do not charge in situations where cover and accessories not able to handle Qi are attached to the portable device. Depending on the type of cover and accessory, it may not be possible to charge. When charging is not performed even with the portable device placed on the charge area, remove the cover and accessories.

■While charging, noise enters the AM radio Turn off the wireless charger and confirm that the noise has decreased. If the noise decreases, continuously pushing the power supply switch of the wireless charger for 2 seconds, the frequency of the charger can be changed and the noise can be reduced.

Also, on that occasion, the operation indicator light will flash orange 2 times.

■Important points of the wireless charger

• If the electronic key cannot be detected within the vehicle interior, charging cannot be done. When the door is opened and closed, charging may be temporarily suspended.
• When charging, the wireless charging device and portable device will get warmer, however this is not a malfunction.

  When a portable device gets warm while charging, charging may stop due to the protection function on the portable device side. In this case, when the temperature of the portable device drops significantly, charge again.

■Operation sounds When the power supply is turned on, while searching for the portable device a sound will be produced, however this is not a malfunction.

WARNING

■Caution while driving When charging a portable device, for safety reasons, the driver should not operate the main the part of the portable device while driving.

Failure to do so may result in a possibility of equipment failure and damage, catch fire, burns due to overheat.

• Do not insert any metallic objects between the charging area and the portable device while charging
• Do not attach stickers, metallic objects, etc., to the charger area or portable device
• Do not cover with cloth, etc., and charge
• Do not charge portable devices other than designated
• Do not attempt to dismantle for disassembly or modifications
• Do not hit or apply a strong force

NOTICE

■Conditions in which the function may not operate correctly In the following conditions, it may not operate correctly

• The portable device is fully charged
• There is foreign matter between the charge area and portable device
• The temperature of the portable device gets higher from charging
• The charging surface of the portable device is facing up
• The placement of the portable device is out of alignment with the charge area
• Near a TV tower, electric power plant, gas station, radio station, large display, airport or other facility that generates strong radio waves or electrical noise
• When the electronic key is in contact with, or is covered by the following metallic objects
  • Cards to which aluminum foil is attached
  • Cigarette boxes that have aluminum foil inside
  • Metallic wallets or bags
  • Coins
  • Hand warmers made of metal
  • Media such as CDs and DVDs
• When other wireless keys (that emit radio waves) are being used nearby

In addition, excluding the above-mentioned, when the charger does not perform normally or the operation display lamp is flashing continuously, it is considered that the wireless charger is malfunctioning.

■To prevent failure or damage to data

• Do not bring magnetic cards, such as credit cards, or magnetic recording media, etc., close to the charger while charging, otherwise, data may disappear under the influence of magnetism.

  Also, do not bring precision instruments such as wrist watches, etc., close to the charger, as such objects may break.

• Do not leave portable devices in the cabin. The temperature inside the cabin may become high, when under the sun, and cause damage to the device.

■To prevent 12-volt battery discharge When the hybrid system is stopped, do not use the wireless charger for a long time.

Armrest

Fold down the armrest for use.

NOTICE

■To prevent damage to the armrest Do not apply too much load on the armrest.

Assist grips

An assist grip installed on the ceiling can be used to support your body while sitting on the seat.

WARNING

■Assist grips Do not use the assist grip when getting in or out of the vehicle or rising from your seat.

NOTICE

■To prevent damage to the assist grip Do not hang any heavy object or put a heavy load on the assist grip.

READ NEXT: