Lexus NX: Power Seat Switch (for Front Seat)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 FRONT LOWER SEAT CUSHION SHIELD *2 FRONT POWER SEAT SWITCH LH *3 FRONT SEAT CUSHION SHIELD LH *4 POWER SEAT SWITCH KNOB LH *5 POWER SEAT SWITCH KNO
Removal
REMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. REMOVE FRONT SEAT ASSEMBLY LH Click here 2.
Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT POWER SEAT SWITCH LH (w/o Memory) (a) Measure the resistance according to the value(s) in the tables below. Standard Resistance (Slide Switch): Tester Conn
SEE MORE:
Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Pre-Collision System / Trouble Codes. Body Electrical > Pre-Collision System > Trouble Codes (e) Check for DTCs.
Removal
REMOVAL PROCEDURE 1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH Click here 2. REMOVE COWL SIDE TRIM BOARD LH Click here 3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Click here 4. REMOVE STOP LIGHT SWITCH ASSEMBLY (a) Disconnect the connector. (b) Loosen the lock
© 2016-2024 Copyright www.lexunx.com
