Lexus NX: Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

NOTICE:

When replacing the radio receiver assembly, always replace it with a new one.

If a radio receiver assembly which was installed to another vehicle is used, the following may occur:

  • A communication malfunction DTC may be stored.
  • The radio receiver assembly may not operate normally.

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.
General Function

Symptom

Suspected Area

Link

The voice recognition function cannot be used, The above symptoms occur after repeatedly restarting with the power switch on (ACC).

Check the radio receiver assembly software version, update to the latest software version if it is available and check for the symptoms again

-

Radio receiver assembly

Valet Mode cannot be canceled.

Proceed to "Valet Mode Cancel" in Operation Check

Radio receiver assembly

The handwriting input screen is not displayed or potential matches for the character currently being entered and potential matches for the next character are not displayed.

Radio receiver assembly

Display Function

Symptom

Suspected Area

Link

Black screen. (no image appears on the audio screen.)

Proceed to "Black Screen"

Proceed to "Check Software Error History" in Operation Check

Proceed to "Visual Mute Signal Circuit between Radio Receiver Assembly and Multi-display assembly"

If the view behind the vehicle is displayed normally on the multi-display assembly when the power switch is on (READY) and the shift position in R, replace the radio receiver assembly

Replace the radio receiver assembly when a music disc is inserted into the radio receiver assembly and audio does not play

Replace the radio receiver assembly when the start screen description sound does not play after pressing the remote touch "MENU" switch

Replace the radio receiver assembly when the determination sound or failure sound does not sound after pressing or double tapping the remote touch screen

Multi-display assembly

Radio receiver assembly

Display does not dim (does not change to night screen) with tail switch on.

Proceed to "Display does not Dim when Light Control Switch is Turned ON"

Multi-display assembly

Radio receiver assembly

Power does not turn off. (screen remains on.)

Proceed to "Radio Receiver Assembly Power Source Circuit"

Multi-display assembly

Radio receiver assembly

Noise occurs when screen changes.

Proceed to "Visual Mute Signal Circuit between Radio Receiver Assembly and Multi-display assembly"

Multi-display assembly

Radio receiver assembly

Screen is distorted.

Proceed to "Radio Receiver Assembly Power Source Circuit"

Proceed to "Visual Mute Signal Circuit between Radio Receiver Assembly and Multi-display assembly"

Multi-display assembly

Radio receiver assembly

Screen flicker or color distortion.

Proceed to "Screen Flicker or Color Distortion"

Proceed to "Visual Mute Signal Circuit between Radio Receiver Assembly and Multi-display assembly"

Radio receiver assembly

Customizable parameters cannot be changed. (customizable parameters can be changed by using the Techstream.)

Radio receiver assembly

Reverse signal does not change in vehicle signal check mode.

Check the shift indicator display on the combination meter assembly

-

Radio receiver assembly

Parking brake switch signal does not change in vehicle signal check mode.

Proceed to "Check Vehicle Signal" in Operation Check

Proceed to "How to Proceed with Troubleshooting" in Electric Parking Brake System

Radio receiver assembly

Panel Switch Function

Symptom

Suspected Area

Link

Illumination for panel switches does not come on when tail switch on.

Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON"

Proceed to "Illumination Circuit"

Radio receiver assembly

Panel switches do not function.

Proceed to "Panel Switches do not Function"

Remote operation controller assembly (remote touch)

Radio receiver assembly

Radio receiver assembly does not dim at night.

Radio receiver assembly

Remote Touch Function

Symptom

Suspected Area

Link

Remote touch screen does not generate vibration feedback.

Proceed to "Remote Touch Screen Does not Generate Vibration Feedback"

Switch lights of remote touch do not illuminate.

Check that the meter/gauge system is operating normally

Proceed to "Switch Lights of Remote Touch do not Illuminate"

Switch lights of remote touch are always illuminated or cannot be controlled using rheostat.

Check that the meter/gauge system is operating normally

Proceed to "Switch Lights of Remote Touch Always Illuminate or cannot be Controlled Using Rheostat"

Switch operation of remote touch is not accepted.

Proceed to "Switch Operation of Remote Touch not Accepted"

Pointer displayed/not displayed repeatedly.

Proceed to "Pointer Displayed/not Displayed Repeatedly"

Pointer is not displayed on screen or pointer does not move.

Proceed to "Pointer not Displayed on Screen or Pointer does not Move"

Steering Pad Switch Function

Symptom

Suspected Area

Link

System cannot be operated by steering pad switch.

Proceed to "Panel Switches do not Function"

Proceed to "Steering Pad Switch Circuit"

Radio receiver assembly

Illumination for steering pad switch does not come on with tail switch on.

Proceed to "Illumination Circuit"

Radio receiver assembly

GPS Function

Symptom

Suspected Area

Link

"No GPS signal" mark is displayed.

Proceed to ""No GPS signal" mark is displayed"

Antenna cord sub-assembly

Navigation antenna assembly

Radio receiver assembly

Date and time on Multi-display screen are different from actual date and time.

Proceed to ""No GPS signal" mark is displayed"

Antenna cord sub-assembly

Navigation antenna assembly

Radio receiver assembly

FM or AM Radio Function

Symptom

Suspected Area

Link

Radio broadcast cannot be received or poor reception.

Proceed to "Radio Broadcast cannot be Received or Poor Reception"

Radio broadcast can be received but radio station cannot be displayed. (some radio stations do not provide their name information.)

Radio receiver assembly

Radio broadcast can be displayed but radio broadcast cannot be heard from speakers.

Check the volume settings

-

Radio receiver assembly

Radio broadcast can be received but station list cannot be displayed.

Wait for 120 seconds in radio mode, and select "Refresh" on the station list screen

-

Radio receiver assembly

Radio broadcast can be received but station list cannot be updated.

Select "Refresh" on the station list screen

-

Wait for 10 minutes with the power switch on (ACC), and select "Refresh" on the station list screen again

-

Radio receiver assembly

General Audio Function

Symptom

Suspected Area

Link

Pressing power switch does not turn on system.

Proceed to "Radio Receiver Assembly Power Source Circuit"

Radio receiver assembly

No sound can be heard from speakers.

Proceed to "No Sound can be Heard from Speakers"

Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"

Proceed to "Mute Signal Circuit between Stereo Component Amplifier and Telematics Transceiver"*

Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"

Proceed to "Speaker Circuit"

DCM (telematics transceiver)*

Stereo component amplifier assembly

Radio receiver assembly

Abnormal noise occurs.

Proceed to "Noise Occurs"

Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"

Proceed to "Mute Signal Circuit between Stereo Component Amplifier and Telematics Transceiver"*

Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"

DCM (telematics transceiver)*

Stereo component amplifier assembly

Radio receiver assembly

Sound quality is bad in all modes. (volume is too low.)

Check that the ASL function is off

-

Proceed to "Poor Sound Quality in All Modes (Low Volume)"

Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"

Proceed to "Mute Signal Circuit between Stereo Component Amplifier and Telematics Transceiver"*

Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"

Proceed to "Speaker Circuit"

DCM (telematics transceiver)*

Replace the stereo component amplifier assembly if the value of the displayed volume changes in accordance with the operation of the volume control

Radio receiver assembly

ASL does not function.

Check that the ASL function is on

-

Proceed to "Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter"

Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"

Stereo component amplifier assembly

Radio receiver assembly

  • *: w/ Manual (SOS) Switch
CD or DVD Player Function

Symptom

Suspected Area

Link

Disc cannot be played or player does not function with disc.

Proceed to "Disc Player Outline" in System Description and check if the disc is compatible with the disc player

Proceed to "Check Optical Disc Error History" in Operation Check

Radio receiver assembly

Disc cannot be inserted/played or disc is ejected right after insertion.

Proceed to "Check Optical Disc Error History" in Operation Check

Proceed to "Disc cannot be Inserted or is Ejected Right After Insertion"

Disc cannot be ejected.

Proceed to "Check Optical Disc Error History" in Operation Check

Proceed to "Disc cannot be Ejected"

Disc sound skips.

Proceed to "Check Optical Disc Error History" in Operation Check

Proceed to "CD/DVD Sound Skips"

While vehicle is stopped, DVD cannot be viewed even when parking brake is applied. (parking brake switch is on.)

Proceed to "Check Vehicle Signal" in Operation Check

Proceed to "How to Proceed with Troubleshooting" in Electric Parking Brake System

Radio receiver assembly

Screen color is poor only when watching a DVD.

Change the color settings on the screen adjustment screen

-

Radio receiver assembly

Sound quality is bad only when a disc is played. (volume is too low.)

Proceed to "Check Optical Disc Error History" in Operation Check

Proceed to "Sound Quality is Bad Only when Disc is Played (Volume is Too Low)"

When disc is playing, some cover art is not displayed.

When a song unregistered to the cover art database is playing, its cover art cannot be displayed

-

When disc is playing, cover art cannot be displayed.

Radio receiver assembly

Album cover art cannot be displayed.

Check that display cover art on the audio common settings screen is set to on

-

Check if similar symptoms occur with another vehicle

-

If an indication to update the Gracenote database appears on the album cover art screen and update data has been downloaded to the radio receiver assembly, update the Gracenote database to the latest version

-

Radio receiver assembly

Voice Recognition Function

Symptom

Suspected Area

Link

Voice menu screen is not displayed. (voice recognition function does not turn on.)

Check if the voice recognition prompt function is on

-

Proceed to "Panel Switches do not Function"

Proceed to "Steering Pad Switch Circuit"

Radio receiver assembly

When voice recognition switch is pressed, a short beep is emitted but voice cannot be recognized properly.

Check for any blockage in the sound holes of the roof headlining holder cover

-

Remove the roof headlining from the roof headlining holder cover and with the roof headlining holder cover and telephone microphone assembly in the installed condition, check that there are no disconnected or lifted up parts

-

Proceed to "Voice is not Recognized"

Proceed to "Microphone Circuit"

Radio receiver assembly

  • *: w/ Manual (SOS) Switch
"Wi-Fi" hotspot Function (w/ "Wi-Fi" hotspot Function)

Symptom

Suspected Area

Link

"Wi-Fi" connection cannot be established.

Check if the LEXUS App Suite function is available

Check the DCM icon on the multi-display assembly

-

Check the status of the "Wi-Fi" hotspot contract

-

Check that the "Wi-Fi" hotspot function is on

-

Check the condition of the "Wi-Fi" hotspot indicator

-

Check if a known good "Wi-Fi" compatible device can be connected to the vehicle

-

Move the vehicle to an area with little wave interference and remove any optional components which may cause wave interference and then check again

-

Radio receiver assembly

"Bluetooth" Hands-free Function

Symptom

Suspected Area

Link

"Bluetooth" is inoperative. (In-vehicle device cannot be recognized by the cellular phone.)

Restart the cellular phone and check the operation

-

Radio receiver assembly

"Bluetooth" compatible cellular phone cannot be registered.

Proceed to "Cellular Phone Registration Failure"

"Bluetooth" compatible cellular phone cannot be connected.

Check that no other cellular phone is connected as a hands-free device

-

Bring the cellular phone near the in-vehicle device and reconnect it

-

Proceed to "Cellular Phone Inspection"

Radio receiver assembly

"Bluetooth" compatible cellular phone cannot be connected automatically. (can be connected manually.)

Check that "Bluetooth" automatic connection setting of the in-vehicle device is on

-

Radio receiver assembly

"Bluetooth" compatible cellular phone connection is disconnected.

Bring the cellular phone near the in-vehicle device and check if it is reconnected

-

Proceed to "Cellular Phone Inspection"

Radio receiver assembly

Message that prompts to check the cellular phone is displayed.

Bring the cellular phone near the in-vehicle device and check if it is reconnected

-

Proceed to "Cellular Phone Inspection"

Radio receiver assembly

When the is turned on (ACC), instructions for checking the connection condition between the in-vehicle device and cellular phone are displayed.

Turn the cellular phone connection conformation display on the in-vehicle device off

-

Phonebook data cannot be transferred.

Check that the phonebook automatic transfer setting of the in-vehicle device is on

-

Enter "1234" into the "Bluetooth" phone (when transferring phonebook data, OBEX authentication may be required)

-

Check that no applications on the cellular phone are operating

-

If using "Bluetooth" audio function, cancel the "Bluetooth" audio player connection and check the operation

-

Transfer phonebook data manually

-

Proceed to "Cellular Phone Inspection"

Radio receiver assembly

Phonebook data is cleared.

Radio receiver assembly

Phonebook data cannot be edited.

Check that the phonebook data automatic transfer setting is off

-

Radio receiver assembly

All of the transferred phonebook data is sorted to "Other".

Check that no applications on the cellular phone are operating

-

Check that phonebook data in the cellular phone is not stored to the SIM card

-

Proceed to "Cellular Phone Inspection"

Explain to the customer that all of the transferred phonebook data may be stored to "Other" depending on cellular phone

-

Cellular phone cannot make outgoing/incoming calls.

Move the vehicle into a cellular phone service area, check that the "Bluetooth" device is connected to the vehicle and operate device again

-

Check that the cellular phone can make outgoing/incoming calls properly when not connected via "Bluetooth"

-

Proceed to "Cellular Phone Inspection"

Radio receiver assembly

Other caller's voice is interrupted by noise or sound quality is poor.

Check the receiving voice volume (if it is too high, voice may sound distorted)

-

Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly

-

Proceed to "Check Hands-free Voice Quality Setting" in Operation Check

Proceed to "Cellular Phone Inspection"

Radio receiver assembly

Other caller's voice cannot be heard.

Check that reception voice volume is not set to minimum

-

Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly

-

Proceed to "Check Hands-free Voice Quality Setting" in Operation Check

Proceed to "Cellular Phone Inspection"

Radio receiver assembly

Caller's voice (your voice) is interrupted by noise or sound quality is poor.

Check the transmitting voice volume (if it is too high, voice may sound distorted)

-

Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)

-

Check for any blockage in the sound holes of the roof headlining holder cover

-

Remove the roof headlining from the roof headlining holder cover and with the roof headlining holder cover and telephone microphone assembly in the installed condition, check that there are no disconnected or lifted up parts

-

Proceed to "Check Hands-free Voice Quality Setting" in Operation Check

Proceed to "Cellular Phone Inspection"

Proceed to "Microphone Circuit"

Radio receiver assembly

Other caller cannot hear your voice.

When talking on the cellular phone, check that the mute button is not pressed

-

Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)

-

Check for any blockage in the sound holes of the roof headlining holder cover

-

Remove the roof headlining from the roof headlining holder cover and with the roof headlining holder cover and telephone microphone assembly in the installed condition, check that there are no disconnected or lifted up parts

-

Proceed to "Check Hands-free Voice Quality Setting" in Operation Check

Proceed to "Cellular Phone Inspection"

Proceed to "Microphone Circuit"

Radio receiver assembly

"Bluetooth" can be connected while driving.

Proceed to "How to Proceed with Troubleshooting" in Electric Parking Brake System

Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"

Radio receiver assembly

No notification when a new SMS/MMS/e-mail has been received.*

Check the SMS/MMS/e-mail notification settings on the cellular phone and the radio receiver assembly

-

Proceed to "Cellular Phone Inspection"

Radio receiver assembly

Received SMS/MMS/e-mail cannot be read.*

Check the SMS/MMS/e-mail transfer settings on the cellular phone and the radio receiver assembly

-

Proceed to "Cellular Phone Inspection"

Radio receiver assembly

SMS/MMS/e-mail cannot be replied to.*

Move the vehicle into a cellular phone service area, and check the operation of the radio receiver assembly and cellular phone

-

Check that the cellular phone can send an SMS/MMS/e-mail

-

Proceed to "Cellular Phone Inspection"

Radio receiver assembly

  • *: w/ SMS/MMS/e-mail Function
"Bluetooth" Audio Function

Symptom

Suspected Area

Link

Portable player cannot be registered.

Check that the portable player is not connected the radio receiver assembly via "Android Auto"

-

Proceed to "Portable Player cannot be Registered"

Radio receiver assembly

Portable player cannot be connected manually/automatically.

Proceed to "Portable Player cannot be Registered"

Proceed to "Portable Player cannot be Connected Manually/Automatically"

Radio receiver assembly

Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth".

Check that the cellular phone with portable audio function is not connected the radio receiver assembly via "Android Auto"

-

Proceed to "Portable Player cannot be Registered"

Proceed to "Portable Player cannot be Connected Manually/Automatically"

Radio receiver assembly

Sound of portable player cannot be heard from speakers, or sound is low.

Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low"

Radio receiver assembly

Portable player does not play even after "Bluetooth" audio mode is selected.

Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"

Radio receiver assembly

Portable player does not play.

Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"

Radio receiver assembly

Track information such as track number, track name, elapsed play time and playlist is not displayed.

Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"

Radio receiver assembly

Operation switches for portable player such as play, pause, repeat, random and scan are not displayed.

Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"

Radio receiver assembly

Battery condition of portable player is not displayed.

Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"

Radio receiver assembly

"Bluetooth" signal condition is not displayed.

Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"

Radio receiver assembly

Portable player cannot pause, select file, fast forward, fast rewind, play at random or scan.

Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"

Radio receiver assembly

Noise occurs or sound skips when portable player plays.

Proceed to "Noise Occurs or Sound Skips when Portable Player Plays"

Radio receiver assembly

Registered device cannot be deleted.

Proceed to "Registered Device cannot be Deleted"

Radio receiver assembly

USB Function

Symptom

Suspected Area

Link

USB sound cannot be heard or sound quality is bad. (USB connector is used.)

Proceed to "Data Signal Circuit between Radio Receiver Assembly and Stereo Jack Adapter"

No. 1 stereo jack adapter assembly

Radio receiver assembly

USB device or "iPod" is not recognized.

Check that the designated folder name is used

-

Check that the file name is 32 characters or less and is in an available language

-

Check that the file system of the USB device is FAT16 or FAT32

-

Proceed to "USB Audio System Recognition/Play Error"

No. 1 stereo jack adapter assembly

Radio receiver assembly

Track information, such as track, artist and album name, is not displayed.

Proceed to "USB Audio System Recognition/Play Error"

No. 1 stereo jack adapter assembly

Radio receiver assembly

USB device or "iPod" is recognized but cannot play, or can play but not in a sorted order.

Proceed to "USB Audio System Recognition/Play Error"

No. 1 stereo jack adapter assembly

Radio receiver assembly

Album cover art cannot be displayed.

Check that display cover art on the audio common settings screen is set to on

-

Check that a JPEG file is used for the album cover art registered to the music data in the "iPod"

-

Check if similar symptoms occur with another vehicle

-

If an indication to update the Gracenote database appears on the album cover art screen and update data has been downloaded to the radio receiver assembly, update the Gracenote database to the latest version

-

Radio receiver assembly

User set album cover art cannot be displayed.

Check if the priority display of Gracenote database album cover art setting is off

-

Check that a JPEG file is used for the album cover art registered to the music data on the USB device or "iPod"

-

Radio receiver assembly

"iPod" battery cannot be charged.

Proceed to "USB Audio System Recognition/Play Error"

No. 1 stereo jack adapter assembly

Radio receiver assembly

Screen is distorted or not displayed only when using the video function of USB device.

No. 1 stereo jack adapter assembly

Radio receiver assembly

Screen color is poor only when watching video stored on USB device.

Change the color settings on the screen adjustment screen

-

Proceed to "Data Signal Circuit between Radio Receiver Assembly and Stereo Jack Adapter"

No. 1 stereo jack adapter assembly

Radio receiver assembly

"IF-BOX_USB" is not displayed on system check mode screen.

Proceed to "USB Audio System Recognition/Play Error"

No. 1 stereo jack adapter assembly

Radio receiver assembly

Stereo jack adapter light does not illuminate.

Proceed to "Stereo Jack Adapter Light does not Illuminate"

AUX (Stereo Jack) Function

Symptom

Suspected Area

Link

External device sound cannot be heard or sound quality is bad. (when No. 1 stereo jack adapter assembly is used.)

Proceed to "Sound Signal Circuit between Radio Receiver Assembly and Stereo Jack Adapter"

No. 1 stereo jack adapter assembly

Radio receiver assembly

HD Radio Function

Symptom

Suspected Area

Link

Only "HD Radio" stations cannot be heard or selected, or their analog or digital sound cannot be changed.

Check the "HD Radio" settings

-

Radio receiver assembly

When the HD radio is playing, cover art may not be displayed.

When a song unregistered to the Gracenote CDDB is playing or cover art information is not provided by the broadcast station, its cover art cannot be displayed

-

When the HD radio is playing, cover art cannot be displayed.

Radio receiver assembly

Broadcast station logo cannot be displayed.

Check if similar symptoms occur when receiving other broadcasts

-

Check if similar symptoms occur with another vehicle

-

Radio receiver assembly

SPS channel cannot be selected.

Check that HD radio FM mode is selected

-

After pressing the "Refresh" switch, check that the SPS channel is on the station list

-

Radio receiver assembly

When the SPS channel is selected, sound cannot be heard.

After pressing the "Refresh" switch, select the SPS channel on the station list

-

Radio receiver assembly

Sirius XM System Function (w/ SXM System)

Symptom

Suspected Area

Link

Satellite radio broadcast cannot be received or reception is bad.

Proceed to "Satellite Radio Broadcast cannot be Received"

Radio receiver assembly

Satellite radio cannot receive pay-type broadcasts.

Proceed to "Satellite Radio Broadcast cannot be Received"

Radio receiver assembly

Satellite radio broadcast cannot be selected or after selecting broadcast, broadcast cannot be added into memory.

Proceed to "Satellite Radio Broadcast cannot be Received"

Proceed to "Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory"

Radio receiver assembly

Satellite radio can be displayed but radio broadcast cannot be heard from speakers.

Check the volume settings

-

Proceed to "Satellite Radio Broadcast cannot be Received"

Radio receiver assembly

When the satellite radio is playing, some cover art may not be displayed.

When a song unregistered to the cover art database is playing, its cover art cannot be displayed

-

When the satellite radio is playing, cover art cannot be displayed.

Radio receiver assembly

"Apple CarPlay" Function

Symptom

Suspected Area

Link

"Apple CarPlay" function cannot be started. (smartphone battery can be charged).

Check that the smartphone is "Apple CarPlay" compatible

-

Check that the smartphone is connected to the No. 1 stereo jack adapter assembly via an appropriate cable

-

Check smartphone settings

-

Check radio receiver assembly settings

-

Check connection of smartphone to radio receiver assembly

-

Radio receiver assembly

"Apple CarPlay" function can be started but sound cannot be heard. (smartphone battery can be charged).

Check that sound can be output from the vehicle speakers

-

Check that sound can be output from the smartphone

-

Check that the volume is not set to "0"

-

Check that mute is off

 

Check "Apple CarPlay" function using another compatible smartphone

-

Radio receiver assembly

"Android Auto" Function

Symptom

Suspected Area

Link

"Android Auto" function cannot be started (smartphone battery can be charged).

Check that the smartphone is "Android Auto" compatible

-

Check that the smartphone is connected to the No. 1 stereo jack adapter assembly via an appropriate cable

-

Check that "Android Auto" is installed on the smartphone

-

Check radio receiver assembly settings

-

Check connection of smartphone to radio receiver assembly

-

Radio receiver assembly

"Android Auto" function can be started but sound cannot be heard (smartphone battery can be charged).

Check that sound can be output from the speakers

-

Check that sound can be output from the smartphone

-

Check that the volume is not set to "0"

-

Check that mute is off

-

Check "Android Auto" function using another compatible smartphone

-

Radio receiver assembly

Software Update Function

Symptom

Suspected Area

Link

"The software update cannot be started because the media is in use. Please try again when the media is no longer in use." is displayed.

Perform the operation again after ending when music is played with USB-Audio

-

Replace USB memory device

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

"Unable to update the software. Please try again later." is displayed.

There may be times that the software update cannot be performed due to communication device or media is still preparing, such as trying to perform the software update right after the audio and visual system has started up, so perform the operation after a while

-

Make inquiry to the service center whether there is any problem with the download software

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

"Unable to get new software because the line is busy. Please try again later." is displayed.

Perform the operation after a while

-

End other functions that are using communications, and perform the operation again

-

Make inquiry to the service center about the operational condition

-

Make inquiry to the service center whether there is any problem with the send log to the device

-

Perform the software update using the communication again

-

Perform the software update using the USB memory device again

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

"Software update service finished." is displayed.

Make inquiry to the service center and confirm whether service is a finished device

-

Make inquiry to the service center whether there is any problem with the send log to the device

-

Make inquiry to the service center whether the model ID checked on the software update screen and the model ID sent from the device are same

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

"There is a software update. Please contact your dealer." or similar is displayed.

Make inquiry to the service center whether there is any problem with the send log to the device

-

Perform the software update using the communication again

-

Perform the software update using the USB memory device again

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

"There is a software update. Please perform update with a PC." or similar is displayed.

Check with the service center whether the size of the software the device is trying to update can be sent by DCM (telematics transceiver). If the size cannot be sent, perform the software update using a USB memory device*

-

Make inquiry to the service center whether there is any problem with the send log to the device

-

Perform the software update using the communication again

-

Perform the software update using the USB memory device again

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

"There is no new software or the media is not inserted." is displayed.

Check that the USB memory device with new software stored is connected to the USB terminal

-

Check the model ID on the software update screen and check that it is same as the file name of the software downloaded

-

Download the software using a PC again, copy it to a USB memory device, and perform software update

-

Make inquiry to the service center whether there is any problem with the download software

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

"There is a problem with the downloaded data. Please try again later." is displayed.

Make inquiry to the service center whether there is any problem with the download software

-

Perform the software update using the communication again

-

Perform the software update using the USB memory device again

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

"New software is not compatible with the system." is displayed.

Make inquiry to the service center whether there is any problem with the download software

-

Download the software using a PC again, copy it to a USB memory device, and perform software update

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

"The combination of update files is abnormal. Please download it again" or similar is displayed.

Make inquiry to the service center whether there is any problem with the download software

-

Perform the software update using the communication again

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

"New software is not compatible with the system. Contact your dealer." is displayed.

Perform the software update using the communication

-

Perform the software update using the USB memory device

-

"Software could not be updated. Please contact your dealer." is displayed.

Make inquiry to the service center whether the model ID checked on the software update screen and the model ID sent from the device are same

-

Make inquiry to the service center whether there is any problem with the download software

-

Make inquiry to the service center whether there is any problem with the send log to the device

-

Perform the software update using the communication again

-

Perform the software update using the USB memory device again

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

"There is insufficient free space. Please contact your dealer." is displayed.

Perform the software update using the communication again

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

The software update could not be performed using communication.

Follow the instruction when an on-screen message is displayed

-

Check that "Check with service center" is displayed and the USB memory device is not connected to the USB connector

-

Explain to the customer that the last software update is downloading when "New software is downloading" is displayed

-

Explain to the customer that the last software update is installing when "New software is installing" is displayed

-

Check that the telematics system is operating normally

-

Perform the software update using the communication again

-

Perform the software update using the USB memory device again

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

The software update could not be performed using the USB memory device.

Follow the instruction when an on-screen message is displayed

-

Check that "Perform software update" is displayed and check that the USB memory device with new software stored is connected to the USB connector

-

Explain to the customer that the last software update is downloading when "New software is downloading" is displayed

-

Explain to the customer that the last software update is installing when "New software is installing" is displayed

-

Perform the software update using the USB memory device again

-

If there is software update data for the audio system but the software update cannot be performed, replace the radio receiver assembly

Update information cannot be checked when trying to update the software using the communication.

Explain to the customer that "Update information" is not displayed on the software update screen when the software is up to date

-

Perform the software update using a USB memory device because a software update using communication is not possible when an on-screen message other than "Current software is up to date. There is no need to update" is displayed when "Check with service center" is selected

-

Make inquiry to the service center whether there is any problem with the download software

-

Perform the software update using the communication again

-

Perform the software update using the USB memory device again

-

If the audio software update information cannot be checked, replace the radio receiver assembly

Version display of the software update screen or the display of the update information screen is abnormal.

Make inquiry to the service center whether there is any problem with the download software

-

Perform the software update using the communication again

-

Perform the software update using the USB memory device again

-

If the version display of the audio is abnormal, replace the radio receiver assembly

Date of the update information is not displayed.

The date of update information is not displayed when GPS is not received, therefore check that the "No GPS Signal" mark is not displayed

-

Since the date may not be recorded when the software update is performed without receiving the GPS, check with the customer if the software update is not performed in location where the GPS reception was poor, such as underground parking lot

-

Wait and see until next software update

-

Past software update history is cleared.

Explain to the customer that the history is cleared in the order from oldest when there are 20 or more history recorded

-

Wait and see until the next software update and replace the radio receiver assembly if the symptom reproduces

  • *: w/ Manual (SOS) Switch
ECO Information Function

Symptom

Suspected Area

Link

Energy flow and battery level are not displayed on the "Energy Monitor" screen.

Turn the power switch on (IG) and recheck

-

Check that the hybrid control system is operating normally

Navigation ECU

Information is not displayed or updated on the "Trip Information" screen.

Turn the power switch on (IG) and recheck

-

Check that the hybrid control system is operating normally

Radio receiver assembly

Cruise range is not displayed on the "Trip Information" screen.

Turn the power switch on (IG) and recheck

-

Radio receiver assembly

Information is not displayed or updated on the "History" screen.

Turn the power switch on (IG) and recheck

-

Check that the meter/gauge system is operating normally

Radio receiver assembly

"Fuel Consumption" icon is dimmed.

Check if other icons or items displayed on screen have any problems

-

Radio receiver assembly

Graph is not displayed on "Trip Information" screen.

Recheck with the hybrid control system operating

Radio receiver assembly

Cruise range is not displayed on "Trip Information" screen.

Turn the power switch on (IG) and recheck

-

Radio receiver assembly

Graph is not updated on "History" screen even though "Clear" is selected.

Turn the power switch on (IG) and recheck

-

Radio receiver assembly

Graph is not displayed on "History" screen.

Turn the power switch on (IG) and recheck

-

Radio receiver assembly

eOwner's Manual Function

Symptom

Suspected Area

Link

The eOwner's Manual CD or USB memory device is inserted but "Please check that the media is properly inserted" is displayed and installation cannot be started.

Check that the inserted media (CD or USB memory device) is recognized on the multi-display assembly audio screen

-

Using a personal computer, check that only the following 4 files are stored on the inserted media (CD or USB memory device)

  • contents.sig
  • contents.tar
  • product_code
  • product_code.sig

-

Check that the inserted CD is the installation CD supplied with the owner's manual.

-

Check that the inserted USB memory device is an official device distributed by the manufacturer

-

Check that other CD's or USB memory devices containing music data can be recognized

-

During installation of the eOwner's Manual, "There is a problem with the eOwner's Manual data. Please install again." is displayed.

Check that the removal operations have not been performed while the media (CD or USB memory device) is being read

-

Using a personal computer, check that only the following 4 files are stored on the inserted media (CD or USB memory device)

  • contents.sig
  • contents.tar
  • product_code
  • product_code.sig

-

Check that the inserted CD is the installation CD supplied with the owner's manual

-

Perform installation using an installation CD supplied with an owner's manual from another vehicle of the same model

-

The eOwner's manual cannot be displayed.

After using the initialization specific data to perform initialization, perform installation using the installation CD supplied with the owner's manual

-

Parts of the eOwner's manual cannot be displayed.

After using the initialization specific data to perform initialization, perform installation using the installation CD supplied with the owner's manual

-

The languages that can be selected on the multi-display assembly cannot be selected within the eOwner's Manual.

Explain to the customer that the supported manual language is matched to the language in the owner's manual booklet and therefore cannot be selected

-

Changing the theme color on the multi-display assembly does not change the color within the eOwner's Manual.

Explain to the customer that changing theme colors is not supported for the eOwner's manual

-

READ NEXT:

 Terminals Of Ecu

TERMINALS OF ECU *A w/ Manual (SOS) Switch - - Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition *1: w/ Manual (SOS) Switch *2: w/o Manu

 Dtc Check / Clear

DTC CHECK / CLEAR CHECK DTC (CHECK USING Techstream) (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG) and wait for 90 seconds. (c) Turn the Techstream on. (d) Enter the follow

 Freeze Frame Data

FREEZE FRAME DATA CHECK FREEZE FRAME DATA (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Naviga

SEE MORE:

 Blind Spot Monitor Master Module (C1AB6)

DESCRIPTION This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction. DTC No. Detection Item DTC Detection Condition Trouble Area Note C1AB6 Blind Spot Monitor Master Module The blind spot monitor sensor LH (master) detects an internal malfunction.

 For safe driving

For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture Adjust the angle of the seatback so that you are sitting straight up and so that you do not have to lean forward to steer. Adjust the seat so that you can depress the pe

© 2016-2024 Copyright www.lexunx.com