Lexus NX: System Diagram

SYSTEM DIAGRAM

FRONT WIPER AND WASHER SYSTEM (w/ Rain Sensor)

FRONT WIPER AND WASHER SYSTEM (w/o Rain Sensor)

REAR WIPER AND WASHER SYSTEM

HEADLIGHT CLEANER SYSTEM (w/ Headlight Cleaner System, for Triple Beam Headlight)

HEADLIGHT CLEANER SYSTEM (w/ Headlight Cleaner System, for Single Beam Headlight)

WASHER FLUID LEVEL WARNING SYSTEM

READ NEXT:

 System Description

SYSTEM DESCRIPTION WASHER-LINKED FUNCTION (a) This system operates the front wipers at low speed immediately after spraying a jet of washer fluid when the front washer switch is turned on for 0.3 seco

 How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the wiper and washer system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT

 Problem Symptoms Table

PROBLEM SYMPTOMS TABLE NOTICE: Recognition code registration is necessary when replacing the main body ECU (multiplex network body ECU). If the main body ECU (multiplex network body ECU) is repla

SEE MORE:

 Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE HOOD INSULATOR (a) Using a clip remover, remove the 7 clips. (b) Detach the 2 guides and remove the hood insulator. 2. REMOVE HOOD TO FRONT FENDER SEAL LH (a) Using a clip remover, detach the 2 claws and remove the hood to front fender seal LH.

 Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE INTAKE VALVE (a) Using SST and wooden blocks, compress the inner compression spring and remove the valve spring retainer locks. SST: 09202-70020 SST: 09202-00021 (b) Remove the valve spring retainer, inner compression spring and intake valve. HINT: Arra

© 2016-2024 Copyright www.lexunx.com