Lexus NX: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the power switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Door Lock.
(5) Select the setting by referring to the table below.
Door Lock| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Unlock Key Twice | Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Auto Lock | Function that locks all doors when the vehicle speed reaches a certain level. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Auto Lock/Shift | Function that locks all doors when the shift lever is moved out of P, with the power switch on (IG) and all doors closed. | OFF | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Auto Unlock/Shift | Function that unlocks all doors when the shift lever is moved to P from any position other than P with the power switch on (IG). | OFF | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| All Unlock/Open-Close | Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the power switch being turned off. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
(b) Customizing with the Multi-display
(1) Turn the power switch on (IG).
(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings.
(3) Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Speed sensitive auto locking | On | Function that locks all doors when the vehicle speed reaches a certain level. | On or Off | Main body ECU (Multiplex network body ECU) |
| Auto lock by shift from P | Off | Function that locks all doors when the shift lever is moved out of P, with the power switch on (IG) and all doors closed. | On or Off | Main body ECU (Multiplex network body ECU) |
| Auto unlock by shift to P | Off | Function that unlocks all doors when the shift lever is moved to P from any position other than P with the power switch on (IG). | On or Off | Main body ECU (Multiplex network body ECU) |
| Auto unlock by driver door | On | Function that unlocks the other doors when the driver door is opened within 10 seconds of the power switch being turned off. | On or Off | Main body ECU (Multiplex network body ECU) |
READ NEXT:
Initialization
INITIALIZATION BACK DOOR LOCK (a) When the auxiliary battery is reconnected: If the back door is locked and therefore cannot be opened, it is necessary to unlock the back door using the door control s
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE: If the main body ECU (multiplex network body ECU) is replaced, refer to the Smart Access System with Push-button Start (for Entry Function). Click here HINT:
Use t
Terminals Of Ecu
TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) *1 Main Body ECU (Multiplex Network Body ECU) - - (a) Remove the main body E
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL TILT AND TELESCOPIC SWITCH (a) Attach the claw to install the tilt and telescopic switch. (b) Connect the connector. 2. INSTALL LOWER STEERING COLUMN COVER (a) Attach the 2 claws to install the lower steering column cover. NOTICE: Do not damage the tilt and telescop
Removal
REMOVAL PROCEDURE 1. PRECAUTION (a) w/ Parking Assist Monitor System: Click here (b) w/ Panoramic View Monitor System: Click here 2. REMOVE BACK DOOR TRIM BASE (w/ Power Back Door) Click here 3. REMOVE PULL HANDLE (w/ Power Back Door) Click here 4. REMOVE BACK DOOR FINISH COVER LH (w/o Power
