Lexus NX: For safe driving

For safe driving, adjust the seat and mirror to an appropriate position before driving.

Correct driving posture

Lexus NX. For safe use

  1. Adjust the angle of the seatback so that you are sitting straight up and so that you do not have to lean forward to steer.
  2. Adjust the seat so that you can depress the pedals fully and so that your arms bend slightly at the elbow when gripping the steering wheel.
  3. Lock the head restraint in place with the center of the head restraint closest to the top of your ears.
  4. Wear the seat belt correctly.

WARNING

Observe the following precautions.

Failure to do so may result in death or serious injury.

Correct use of the seat belts

Make sure that all occupants are wearing their seat belts before driving the vehicle. Use a child restraint system appropriate for the child until the child becomes large enough to properly wear the vehicle's seat belt.

Adjusting the mirrors

Make sure that you can see the rear of the vehicle clearly, by adjusting the inside and outside rear view mirrors properly.

READ NEXT:

 Seat belts

Make sure that all occupants are wearing their seat belts before driving the vehicle. WARNING Observe the following precautions to reduce the risk of injury in the event of sudden braking, sudde

 SRS airbags

The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce t

 Front passenger occupant classification system

Your vehicle is equipped with a front passenger occupant classification system. This system detects the conditions of the front passenger seat and activates or deactivates the front passenger ai

SEE MORE:

 Removal

REMOVAL PROCEDURE 1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH Click here 2. REMOVE COWL SIDE TRIM BOARD LH Click here 3. REMOVE CONSOLE ARMREST ASSEMBLY Click here 4. REMOVE UPPER REAR CONSOLE PANEL Click here 5. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH Click here 6. REMOVE INSTRUME

 Fuel Sender Gauge Assembly

ComponentsCOMPONENTS ILLUSTRATION *1 FUEL SENDER GAUGE ASSEMBLY - - N*m (kgf*cm, ft.*lbf): Specified torque - - RemovalREMOVAL PROCEDURE 1. REMOVE FUEL TANK ASSEMBLY Click here 2. REMOVE FUEL SENDER GAUGE ASSEMBLY (a) Remove the 5 screws and fuel sender gauge assembly

© 2016-2026 Copyright www.lexunx.com