Lexus NX: On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. CHECK STEERING WHEEL FREE PLAY
(a) Stop the vehicle and align the tires facing straight ahead.
| (b) Turn the steering wheel assembly gently right and left, and check the steering wheel free play. Maximum free play: 30 mm (1.18 in.) If the free play is more than the maximum, check the steering system. Click here |
|
.gif)
READ NEXT:
Adjustment
ADJUSTMENT PROCEDURE 1. STEERING OFF CENTER ADJUSTMENT HINT: This is the adjustment procedure for when the steering is off-center. (a) Check if the steering wheel is off-center. (1) Apply masking t
Components
COMPONENTS ILLUSTRATION *A w/ Steering Heater - - *1 CRUISE CONTROL MAIN SWITCH *2 SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) *3 STEERING PAD SWITCH ASSEMBLY
SEE MORE:
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states of
Reassembly
REASSEMBLY CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The following procedure is for the LH side.
PROCEDURE 1. TEMPORARILY INSTALL REAR DISC BRAKE BLEEDER PLUG (a) Temporarily install the rear disc brake bleeder plug to the rear disc brake cylinder assembly
© 2016-2024 Copyright www.lexunx.com
