Lexus NX: Operation Check

OPERATION CHECK

CHECK WIRELESS CHARGING SYSTEM OPERATION

(a) Turn the power switch on (ACC) or on (IG).

HINT:

When the wireless charging system is on and the power switch is turned off, the wireless charging system turns on the next time the power switch is turned on (ACC) or on (IG).

*a

Wireless Charger Switch

*b

Indicator (Green/Amber)

*c

Charging Area

(b) When the wireless charging system is turned on, check that the indicator illuminates green.

(c) When the Qi-compatible device is placed on the charging area, check that the indicator illuminates amber and charging starts.

Click here

(d) When the Qi-compatible device charging completes, check that the indicator illuminates green.

HINT:

Even when using a Qi-compatible device, case or accessory, the indicator may fail to illuminate green when the charging is complete. In this case, check the charge condition on the device.

(e) When the wireless charging system is turned off, check that the indicator turns off.

READ NEXT:

 Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of

 Terminals Of Ecu

TERMINALS OF ECU MOBILE WIRELESS CHARGER CRADLE ASSEMBLY Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition *1: When the power switch is turned from

 Wireless Charger Power Source Circuit

DESCRIPTION This is the power source circuit to operate the mobile wireless charger cradle assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this syst

SEE MORE:

 Drive Motor "B" Temperature Sensor Circuit Range / Performance (P0A31-668,P0A34-667)

DESCRIPTION The resistance of the thermistor built into the rear motor temperature sensor changes in accordance with changes in the rear motor temperature. The lower the rear motor temperature, the higher the thermistor resistance. Conversely, the higher the rear motor temperature, the lower the res

 Hybrid Battery Voltage / DC/DC Converter Voltage Correlation (P1C2D-587)

DTC SUMMARY MALFUNCTION DESCRIPTION The hybrid vehicle control ECU detects a VB sensor or VL sensor malfunction. The cause of this malfunction may be one of the following: Inside of inverter voltage sensor circuit malfunction Voltage sensor malfunction Motor generator control ECU (MG ECU) malfu

© 2016-2025 Copyright www.lexunx.com