Lexus NX: Operation Check
OPERATION CHECK
CHECK AIR DUST
(a) Check that there are no cracks or damage on the air ducts of the seat climate control blower and seatback climate control blower, and that the air ducts are installed correctly.
CHECK CLIMATE CONTROL SEAT SYSTEM
(a) Turn the power switch on (IG).
(b) Check that the indicator illuminates and each seat climate control blower and seatback climate control blower operates when the air conditioning control assembly (climate control switch) is turned on.
(c) Check that the blower volume changes according to the operation of the climate control switch on the air conditioning control assembly as follows: HI → MID → LO.
READ NEXT:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE:
If the auxiliary battery voltage is low, the climate control seat system may not operate. When "High Power Consumption Partial Limit On AC/Heater Operation." is displ
Terminals Of Ecu
TERMINALS OF ECU CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (a) Disconnect the I50 air conditioning amplifier assembly connector. (b) Measure the voltage and resistance according to the value(s) in th
Diagnosis System
DIAGNOSIS SYSTEM CHECK DLC3 (a) Check the DLC3. Click here INSPECT AUXILIARY BATTERY VOLTAGE (a) Check the auxiliary battery voltage. Standard voltage: 11 to 14 V (power switch off) If the voltage
SEE MORE:
Stop Light Relay Malfunction (C1380)
DESCRIPTION Upon receiving the hill-start assist control, dynamic radar cruise control, brake hold control or trailer sway control operating signal from the skid control ECU (brake booster with master cylinder assembly), the relay contact turns on and the stop lights come on. DTC No. Detection
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT STOP LIGHT SWITCH ASSEMBLY (a) Disconnect the stop light switch assembly connector. *a Front view of wire harness connector (to Stop Light Switch Assembly) (b) Measure the voltage and resistance on the wire harness side connector
© 2016-2025 Copyright www.lexunx.com
