Lexus NX: Power Assist Systems
Lexus NX Service Manual / Steering / Power Assist Systems
- Power Steering Ecu (for Manual Tilt And Manual Telescopic Steering Column)
- Power Steering Ecu (for Power Tilt And Power Telescopic Steering Column)
- Power Steering System (for Manual Tilt And Manual Telescopic Steering Column)
- Power Steering System (for Power Tilt And Power Telescopic Steering Column)
READ NEXT:
Power Steering Ecu (for Manual Tilt And Manual Telescopic Steering Column)
ComponentsCOMPONENTS ILLUSTRATION *1 ELECTRIC POWER STEERING COLUMN SUB-ASSEMBLY *2 POWER STEERING ECU ASSEMBLY *3 POWER STEERING ECU PROTECTOR *4 ECU WIRE SUB-ASSEMBLY N*m
Components
COMPONENTS ILLUSTRATION *1 ELECTRIC POWER STEERING COLUMN SUB-ASSEMBLY *2 POWER STEERING ECU ASSEMBLY *3 POWER STEERING ECU PROTECTOR *4 ECU WIRE SUB-ASSEMBLY *5 ELECTRIC POW
SEE MORE:
Fuel Run Out (P3193)
DESCRIPTION The ECM receives the fuel empty low level (below approximately 8.4 L) signal from the combination meter assembly (meter ECU) to detect if the vehicle is running out of fuel. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory P3193 Fuel Run Out All
Accumulator Low Pressure (C1256)
DESCRIPTION The accumulator pressure sensor is built into the brake actuator (brake booster with master cylinder assembly) and detects the accumulator pressure. The skid control ECU (brake booster with master cylinder assembly) turns on the brake warning light / red (malfunction) and brake warning l
© 2016-2026 Copyright www.lexunx.com
