Lexus NX: Precaution
PRECAUTION
FOR OPERATION OF ELECTRICAL ITEMS RESTRICTED
NOTICE:
-
If the auxiliary battery voltage is low, the climate control seat system may not operate. When "High Power Consumption / Partial Limit On AC/Heater Operation" is displayed on the multi-information display in the combination meter assembly, inspect the auxiliary battery, referring to On-vehicle Inspection for the charging system.
Click here
.gif)
HINT:
If the auxiliary battery voltage is low, "Operation Limitation Control History Count (Level 1)" and "Operation Limitation Control History Count (Level 2) is counted.
Click here
-
If the auxiliary battery voltage is low, the climate control seat system may not operate. Refer to Data List for the power steering system.
for Manual Tilt and Manual Telescopic Steering Column: Click here
for Power Tilt and Power Telescopic Steering Column: Click here
READ NEXT:
Parts Location
PARTS LOCATION ILLUSTRATION *1 COMBINATION METER ASSEMBLY *2 CLIMATE CONTROL SWITCH (for Driver Side) *3 CLIMATE CONTROL SWITCH (for Front Passenger Side) *4 AIR CONDITIONING CONTR
System Diagram
SYSTEM DIAGRAM
System Description
SYSTEM DESCRIPTION GENERAL (a) The seat blower has 3 levels, controlled by operating the climate control switch on air conditioning control assembly. (b) Whether the blower is on or off can be determi
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL REAR TELEVISION CAMERA ASSEMBLY (a) Install the 2 screws and rear television camera assembly. (b) Connect the connector. 2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY Click here 3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY Click here 4. INSTALL BACK DOOR SIDE GA
Installation
INSTALLATION CAUTION / NOTICE / HINT NOTICE:
Do not replace the spiral with sensor cable sub-assembly with the battery connected and the power switch on (IG).
Do not rotate the spiral with sensor cable sub-assembly when the following conditions are met: 1) The steering wheel is removed, 2) the
© 2016-2025 Copyright www.lexunx.com
