Lexus NX: System Diagram

SYSTEM DIAGRAM

READ NEXT:

 System Description

SYSTEM DESCRIPTION GENERAL (a) The seat blower has 3 levels, controlled by operating the climate control switch on air conditioning control assembly. (b) Whether the blower is on or off can be determi

 How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT HINT: Use this procedure to troubleshoot the climate control seat system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT

 Operation Check

OPERATION CHECK CHECK AIR DUST (a) Check that there are no cracks or damage on the air ducts of the seat climate control blower and seatback climate control blower, and that the air ducts are installe

SEE MORE:

 Inspection

INSPECTION PROCEDURE 1. INSPECT FUEL PUMP ASSEMBLY WITH FILTER (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 0.2 to 3.0 Ω If the result

 Freeze Frame Data

FREEZE FRAME DATA FREEZE FRAME DATA (a) Whenever an automatic headlight beam level control system DTC is stored, the headlight ECU subassembly LH stores the current vehicle state as freeze frame data. CHECK FREEZE FRAME DATA (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG).

© 2016-2026 Copyright www.lexunx.com