Lexus NX: Remote Up / Down Function does not Operate

Lexus NX Service Manual / Vehicle Exterior / Window / Glass / Power Window Control System / Remote Up / Down Function does not Operate

DESCRIPTION

When the power switch is on (IG), the multiplex network master switch assembly sends remote up and down signals to each power window regulator motor assembly via LIN communication.

WIRING DIAGRAM

Click here

CAUTION / NOTICE / HINT

NOTICE:

  • The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly.

    Click here

  • If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system.

    Click here

PROCEDURE

1.

READ VALUE USING TECHSTREAM (MAIN BODY)

(a) Read the Data List according to the display on the Techstream.

Click here

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Communication P-Door Motor

Connection status between front power window regulator motor assembly RH and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Communication stopped

OK: Normal communication

-

Communication RR-Door Motor

Connection status between rear power window regulator motor assembly RH and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Communication stopped

OK: Normal communication

-

Communication RL-Door Motor

Connection status between rear power window regulator motor assembly LH and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Communication stopped

OK: Normal communication

-

Communication Master SW

Connection status between multiplex network master switch assembly and main body ECU (multiplex network body ECU)

STOP or OK

STOP: Communication stopped

OK: Normal communication

-

Body Electrical > Main Body > Data List

Tester Display

Communication P-Door Motor

Communication RR-Door Motor

Communication RL-Door Motor

Communication Master SW

OK:

On the Techstream screen, OK is displayed.

NG

GO TO LIN COMMUNICATION SYSTEM

OK

2.

READ VALUE USING TECHSTREAM (MASTER SWITCH)

(a) Read the Data List according to the display on the Techstream.

Click here

Body Electrical > Master Switch > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

P Door P/W Auto SW

Front passenger door power window auto up and down switch signal

OFF or ON

OFF: Front passenger door power window auto switch not being operated

ON: Front passenger door power window auto switch being operated

-

RR Door P/W Auto SW

Rear RH door power window auto up and down switch signal

OFF or ON

OFF: Rear RH power window auto switch not being operated

ON: Rear RH power window auto switch being operated

-

RL Door P/W Auto SW

Rear LH door power window auto up and down switch signal

OFF or ON

OFF: Rear LH power window auto switch not being operated

ON: Rear LH power window auto switch being operated

-

P Door P/W Up SW

Front passenger door power window manual up switch signal

OFF or ON

OFF: Front passenger door power window manual up switch not being operated

ON: Front passenger door power window manual up switch being operated

-

RR Door P/W up switch

Rear RH door power window manual up switch signal

OFF or ON

OFF: Rear RH power window manual up switch not being operated

ON: Rear RH power window manual up switch being operated

-

RL Door P/W up switch

Rear LH door power window manual up switch signal

OFF or ON

OFF: Rear LH power window manual up switch not being operated

ON: Rear LH power window manual up switch being operated

-

P Door P/W Down SW

Front passenger door power window manual down switch signal

OFF or ON

OFF: Front passenger door power window manual down switch not being operated

ON: Front passenger door power window manual down switch being operated

-

RR Door P/W Down SW

Rear RH door power window manual down switch signal

OFF or ON

OFF: Rear RH power window manual down switch not being operated

ON: Rear RH power window manual down switch being operated

-

RL Door P/W Down SW

Rear LH door power window manual down switch signal

OFF or ON

OFF: Rear LH power window manual down switch not being operated

ON: Rear LH power window manual down switch being operated

-

Window Lock Switch Status

Window lock switch signal

OFF or ON

OFF: Window lock switch UNLOCK position

ON: Window lock switch LOCK position

-

Body Electrical > Master Switch > Data List

Tester Display

P Door P/W Auto SW

RR Door P/W Auto SW

RL Door P/W Auto SW

P Door P/W Up SW

RR Door P/W up switch

RL Door P/W up switch

P Door P/W Down SW

RR Door P/W Down SW

RL Door P/W Down SW

Window Lock Switch Status

OK:

On the Techstream screen, ON or OFF is displayed accordingly.

Result

Proceed to

NG

A

OK (Front passenger door power window remote up and down function does not operate)

B

OK (Rear LH door power window remote up and down function does not operate)

C

OK (Rear RH door power window remote up and down function does not operate)

D

A

REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY

B

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

C

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

D

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

READ NEXT:

 Driver Side Power Window does not Operate with Power Window Master Switch

DESCRIPTION When the power switch is on (IG), the front power window regulator motor assembly LH is operated by the multiplex network master switch assembly. The front power window regulator motor ass

 Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch

DESCRIPTION When the power switch is on (IG), the front power window regulator motor assembly RH is operated by the power window regulator switch assembly. The front power window regulator motor assem

 Rear Power Window RH does not Operate with Rear Power Window Switch RH

DESCRIPTION When the power switch is on (IG), the rear power window regulator motor assembly RH is operated by the rear power window regulator switch assembly (for rear RH door). The rear power window

SEE MORE:

 Inspection

INSPECTION PROCEDURE 1. INSPECT SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY NOTICE: Do not remove the steering sensor from the spiral with sensor cable sub-assembly. As the spiral with sensor cable sub-assembly may break, do not rotate the spiral with sensor cable sub-assembly more than the specified

 Asc Speaker

ComponentsCOMPONENTS ILLUSTRATION *1 NO. 1 SPEAKER ASSEMBLY WITH BOX - - RemovalREMOVAL PROCEDURE 1. REMOVE CONSOLE BOX ASSEMBLY Click here 2. REMOVE NO. 1 SPEAKER ASSEMBLY WITH BOX (a) Remove the 4 bolts and disconnect the connector. (b) Detach the 2 claws used to t

© 2016-2024 Copyright www.lexunx.com