Lexus NX: System Diagram
Lexus NX Service Manual / Audio & Visual & Telematics / Telematics / Telematics System / System Diagram
SYSTEM DIAGRAM
READ NEXT:
System Description
SYSTEM DESCRIPTION OUTLINE (Lexus Enform Remote) (a) Lexus Enform Remote enables the user to check the vehicle status and operate the vehicle from a remote location. (b) Lexus Enform Remote is availab
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT:
Use the following procedure to troubleshoot the telematics system.
*: Use the Techstream.
PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP
NEXT
Operation Check
OPERATION CHECK HINT:
This function shows the telematics network status when the DCM (telematics transceiver) was operated. Use this when no DTC is present but this telematics system was unable to
SEE MORE:
Removal
REMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. REMOVE QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH HINT: When removing the quarter outside moulding sub-assembly LH, if the No. 5 moulding tape(doubl
High Voltage Fuse (P0A95-400)
DESCRIPTION The hybrid vehicle control ECU estimates the thermal load of the high voltage fuse. If the accumulated thermal load exceeds the threshold, the hybrid vehicle control ECU will store this DTC. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
© 2016-2025 Copyright www.lexunx.com
