- Power switch on (IG), shift lever is P → other than P
- Power switch on (IG), stop light switch assembly on → off
- Power switch on (IG), parking brake switch assembly on → off
Lexus NX: Terminals Of Ecu
Lexus NX Service Manual / Vehicle Interior / Seat / Rear Power Seat Control System / Terminals Of Ecu
TERMINALS OF ECU
CHECK FOLD SEAT CONTROL ECU (REAR RIGHT SEAT)
(a) Disconnect the h3 and h4 fold seat control ECU (rear right seat) connectors.
(b) Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| h3-1 (ECUB) - Body ground | W - Body ground | Battery power source | Power switch off | 11 to 14 V |
| h3-3 (IG) - Body ground | B - Body ground | IG power source | Power switch on (IG) | 11 to 14 V |
| Power switch off | Below 1 V | |||
| h3-40 (IND2) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| h4-1 (IND1) - Body ground | B - Body ground | Battery power source | Power switch off | 11 to 14 V |
| h4-2 (+B) - Body ground | W - Body ground | Battery power source | Power switch off | 11 to 14 V |
| h4-9 (GND2) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| h4-10 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
(c) Reconnect the h3 and h4 fold seat control ECU (rear right seat) connectors.
(d) Measure the resistance and voltage according to the value(s) in the table below.
(e) Check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| h3-7 (RCLR) - Body ground | SB - Body ground | Rear power seat switch signal (return, backward) | Rear power seat switch (rear right seat) off → on (return, backward) | 11 to 14 V → Below 1 V |
| h3-8 (SG1) - Body ground | G - Body ground | Ground | Always | Below 1 Ω |
| h3-10 (SFLD) - h3-8 (SG1) | P - G | Folding position sensor signal | Motor operating | Pulse generation |
| h3-11 (SV1) - h3-8 (SG1) | R - G | Folding position sensor power supply | Power switch off → on (IG) | Below 1 V → 5.5 to 8 V |
| h3-12 (RCLF) - Body ground | G - Body ground | Rear power seat switch (rear right seat) signal (fold, forward) | Rear power seat switch (rear right seat) off → on (fold, forward) | 11 to 14 V → Below 1 V |
| h3-13 (RTN2) - Body ground | LG - Body ground | No. 1 fold seat switch assembly (rear right seat) signal (return) | No. 1 fold seat switch assembly (rear right seat) off → on (return) | 11 to 14 V → Below 1 V |
| h3-14 (FLD2) - Body ground | V - Body ground | No. 1 fold seat switch assembly (rear right seat) signal (fold) | No. 1 fold seat switch assembly (rear right seat) off → on (fold) | 11 to 14 V → Below 1 V |
| h3-17 (P) - Body ground | GR - Body ground | Driving condition signal | | 11 to 14 V → Below 1 V |
| Power switch off | 11 to 14 V | |||
| h3-18 (R CL) - Body ground | P - Body ground | Rear door courtesy light switch assembly RH signal | Rear door RH opened → closed | 11 to 14 V → Below 1 V |
| h3-19 (BDCY) - Body ground | R - Body ground | Back door courtesy light switch assembly signal | Back door opened → closed | 11 to 14 V → Below 1 V |
| h3-25 (RTRN) - Body ground | B - Body ground | No. 2 fold seat switch assembly (rear right seat) signal (return) | No. 2 fold seat switch assembly (rear right seat) off → on (return) | 11 to 14 V → Below 1 V |
| h3-26 (FOLD) - Body ground | L - Body ground | No. 2 fold seat switch assembly (rear right seat) signal (fold) | No. 2 fold seat switch assembly (rear right seat) off → on (fold) | 11 to 14 V → Below 1 V |
| h4-3 (RCL+) - Body ground | P - Body ground | Reclining motor operation signal | Rear power seat switch (rear right seat) off → on (forward) | Below 1 V → 11 to 14 V |
| h4-4 (FLD+) - Body ground | L - Body ground | Fold motor operation signal | Rear power seat switch (rear right switch), No. 1 fold seat switch assembly (rear right switch) or No. 2 fold seat switch assembly (rear right switch) off → on (fold) | Below 1 V → 11 to 14 V |
| h4-7 (RCL-) - Body ground | LG - Body ground | Reclining motor operation signal | Rear power seat switch (rear right seat) off → on (backward) | Below 1 V → 11 to 14 V |
| h4-8 (FLD-) - Body ground | SB - Body ground | Return motor operation signal | Rear power seat switch (rear right switch), No. 1 fold seat switch assembly (rear right switch) or No. 2 fold seat switch assembly (rear right switch) off → on (return) | Below 1 V → 11 to 14 V |
CHECK FOLD SEAT CONTROL ECU (REAR LEFT SEAT)
(a) Disconnect the i3 and i4 fold seat control ECU (rear left seat) connectors.
(b) Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| i3-1 (ECUB) - Body ground | W - Body ground | Battery power source | Power switch off | 11 to 14 V |
| i3-3 (IG) - Body ground | B - Body ground | IG power source | Power switch on (IG) | 11 to 14 V |
| Power switch off | Below 1 V | |||
| i3-40 (IND2) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| i4-1 (IND1) - Body ground | B - Body ground | Battery power source | Power switch off | 11 to 14 V |
| i4-2 (+B) - Body ground | W - Body ground | Battery power source | Power switch off | 11 to 14 V |
| i4-9 (GND2) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| i4-10 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
(c) Reconnect the i3 and i4 fold seat control ECU (rear left seat) connectors.
(d) Measure the resistance and voltage according to the value(s) in the table below.
(e) Check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| i3-7 (RCLR) - Body ground | SB - Body ground | Rear power seat switch signal (return, backward) | Rear power seat switch (rear left seat) off → on (return, backward) | 11 to 14 V → Below 1 V |
| i3-8 (SG1) - Body ground | G - Body ground | Ground | Always | Below 1 Ω |
| i3-10 (SFLD) - i3-8 (SG1) | P - G | Folding position sensor signal | Motor operating | Pulse generation |
| i3-11 (SV1) - i3-8 (SG1) | R - G | Folding position sensor power supply | Power switch off → on (IG) | Below 1 V → 5.5 to 8 V |
| i3-12 (RCLF) - Body ground | G - Body ground | Rear power seat switch (rear left seat) signal (fold, forward) | Rear power seat switch (rear left seat) off → on (fold, forward) | 11 to 14 V → Below 1 V |
| i3-13 (RTN2) - Body ground | LG - Body ground | No. 1 fold seat switch assembly (rear left seat) signal (return) | No. 1 fold seat switch assembly (rear left seat) off → on (return) | 11 to 14 V → Below 1 V |
| i3-14 (FLD2) - Body ground | V - Body ground | No. 1 fold seat switch assembly (rear left seat) signal (fold) | No. 1 fold seat switch assembly (rear left seat) off → on (fold) | 11 to 14 V → Below 1 V |
| i3-17 (P) - Body ground | GR - Body ground | Driving condition signal |
| 11 to 14 V → Below 1 V |
| Power switch off | 11 to 14 V | |||
| i3-18 (R CL) - Body ground | P - Body ground | Rear door courtesy light switch assembly LH signal | Rear door LH opened → closed | 11 to 14 V → Below 1 V |
| i3-19 (BDCY) - Body ground | R - Body ground | Back door courtesy light switch assembly signal | Back door opened → closed | 11 to 14 V → Below 1 V |
| i3-25 (RTRN) - Body ground | B - Body ground | No. 2 fold seat switch assembly (rear left seat) signal (return) | No. 2 fold seat switch assembly (rear left seat) off → on (return) | 11 to 14 V → Below 1 V |
| i3-26 (FOLD) - Body ground | L - Body ground | No. 2 fold seat switch assembly (rear left seat) signal (fold) | No. 2 fold seat switch assembly (rear left seat) off → on (fold) | 11 to 14 V → Below 1 V |
| i4-3 (RCL+) - Body ground | P - Body ground | Reclining motor operation signal | Rear power seat switch (rear left seat) off → on (forward) | Below 1 V → 11 to 14 V |
| i4-4 (FLD+) - Body ground | L - Body ground | Fold motor operation signal | Rear power seat switch (rear left switch), No. 1 fold seat switch assembly (rear left switch) or No. 2 fold seat switch assembly (rear left switch) off → on (fold) | Below 1 V → 11 to 14 V |
| i4-7 (RCL-) - Body ground | LG - Body ground | Reclining motor operation signal | Rear power seat switch (rear left seat) off → on (backward) | Below 1 V → 11 to 14 V |
| i4-8 (FLD-) - Body ground | SB - Body ground | Return motor operation signal | Rear power seat switch (rear left switch), No. 1 fold seat switch assembly (rear left switch) or No. 2 fold seat switch assembly (rear left switch) off → on (return) | Below 1 V → 11 to 14 V |
READ NEXT:
Park / Neutral Position Switch Circuit
DESCRIPTION The fold seat control ECU receives switch operation signals, back door open/close signal*1, rear door open/close signal*2 and driving condition signal (shift position, stop light switch as
Rear Door Courtesy Switch Circuit
DESCRIPTION The fold seat control ECU receives the switch operation signal, driving condition signal and rear door open/close signal. Then the fold seat control ECU actives the rear seat according to
Back Door Courtesy Switch Circuit
DESCRIPTION The fold seat control ECU receives the switch operation signal, driving condition signal and back door open/close signal from the back door lock assembly. The fold seat control ECU actives
SEE MORE:
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Perform "Inspection After Repair" after replacing the fuel injector assembly. Click here PROCEDURE 1. INSTALL FUEL INJECTOR ASSEMBLY HINT: Perform "Inspection After Repair" after replacing the fuel injector assembly. Click here (a) Apply a light coat of
Headlight Beam Level Control Motor LH Malfunction (B2417,B2418)
DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area B2417 Headlight Beam Level Control Motor LH Malfunction
Power switch on (IG)
Malfunction in headlight leveling motor LH
10 seconds or more
Headlight unit assembly LH B2418 Headlight Bea
© 2016-2024 Copyright www.lexunx.com
