Lexus NX: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE LIGHTING SYSTEM (INT)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
HINT:
The following items can be customized.
(a) Customizing with the GTS.
(1) Connect the Techstream to the DLC3.
(2) Turn the power switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Utility / Customize / (desired system).
(5) Select the setting by referring to the table below.
Illuminated Entry| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Lighting Time | Changes the lighting time after closing all of the doors [it will fade out immediately when turning the power switch from off to on (ACC) or on (IG)]. | 15 s | 10:30 s,00:15 s,01:7.5 s | Main body ECU (Multiplex network body ECU) |
| I/L when ACC OFF | A function that turns on the interior lights when the door is unlocked (the interior lights turn on when the map light switch and spot light switch are set to DOOR). | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| I/L ON W/Door Key Unlock | A function that turns on the interior lights when the door is unlocked (the interior lights turn on when the map light switch and spot light switch are set to DOOR). | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Room Light when Aprchd | A function that turns on the room lights when the key is brought within the vehicle exterior detection area (the room lights turn on when the map light switch and spot light switch are set to DOOR). | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Inside Foot Light | Changes the interior foot lights control. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Mirr-Foot-Lgt Approached/Exterior Light Approached | Function that turns on the door outside handle assembly (outside foot lights) when the vehicle is approached while carrying the key. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Mirr-Foot-Lgt Unlocked/Exterior Light Unlocked | Function that turns on the door outside handle assembly (outside foot lights) when a door is unlocked with the electrical key transmitter or door lock switch of a door. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Mirror Foot Light Time/Exterior Light Time | Function that sets the illumination time for the door outside handle assembly (outside foot lights). | 15 s | 00:15 s,01:7.5 s,10:30 s,11:0 s | Main body ECU (Multiplex network body ECU) |
| Light Control | This function controls the lights. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Interior Light Control | This function controls the interior lights. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Exterior Light Control | This function controls the door outside handle foot lights. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| 2 Steps Fade Out Control Function | Function to change the 2 steps fade out of light control. (outside foot light etc.) | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
| Exterior Light (Door Open) | Function to change the light on of exterior light (outside foot light etc.) control, when the door is open. | ON | 0:OFF,1:ON | Main body ECU (Multiplex network body ECU) |
Customizing with the Multi-display
(a) Turn the power switch on (IG).
(b) Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Light Settings.
(c) Select the setting by referring to the table below.
Light Settings| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Interior Lights Off Timer | 15 sec. | This function controls the interior lights. | Off, 15 sec., 7.5 sec. or 30 sec. | Main body ECU (Multiplex network body ECU) |
| Exterior Lights Off Timer | 15 sec. | This function controls the door outside handle foot lights. | Off, 15 sec., 7.5 sec. or 30 sec. | Main body ECU (Multiplex network body ECU) |
READ NEXT:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of
Terminals Of Ecu
TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY, MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) *1 Main Body ECU (Multiplex Network Body ECU) - - (a) Remove the main body ECU
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a pa
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 2 COOLING FAN MOTOR (a) Attach the 2 clamps and install the No. 2 cooling fan motor with the 3 screws. Torque: 3.9 N·m {40 kgf·cm, 35 in·lbf} (b) Install the cooling fan motor insulator to the fan shroud with the 2 screws. Torque: 2.6 N·m {27 kgf·cm, 23 i
Removal
REMOVAL PROCEDURE 1. REMOVE SYMBOL EMBLEM HINT: When removing the symbol emblem, heat the back door outside garnish sub-assembly and symbol emblem using a heat light. Standard: Item Temperature Back Door Outside Garnish Sub-assembly 40 to 60°C (104 to 140°F) Symbol Emblem 20 to 3
