Lexus NX: Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

NOTICE:

If the main body ECU (multiplex network body ECU) is replaced, refer to Registration.

Click here

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.
  • If the auxiliary battery voltage becomes low, rear mirror heater operation is canceled to prioritize supplying power to the power steering system.

    for Manual Tilt and Manual Telescopic Steering Column: Click here

    for Power Tilt and Power Telescopic Steering Column: Click here

Power Mirror Control System

Symptom

Suspected Area

Link

Driver side power mirror cannot be adjusted with power mirror switch

Proceed to "Driver Side Power Mirror cannot be Adjusted with Power Mirror Switch"

Front passenger side power mirror cannot be adjusted with power mirror switch

Proceed to "Front Passenger Side Power Mirror cannot be Adjusted with Power Mirror Switch"

Power mirror cannot be adjusted with power mirror switch

Proceed to "Power Mirror cannot be Adjusted with Power Mirror Switch"

Mirror heater does not operate with rear defogger switch

Proceed to "Mirror Heater does not Operate with Rear Defogger Switch"

Mirror heater, rear window defogger and windshield deicer do not operate*

Power steering system (for Manual Tilt and Manual Telescopic Steering Column)

Power steering system (for Power Tilt and Power Telescopic Steering Column)

Power retract mirrors do not operate with power retract mirror switch

Proceed to "Power Retract Mirrors do not Operate with Power Retract Mirror Switch"

AUTO power retract mirrors do not operate

Proceed to "AUTO Power Retract Mirrors do not operate"

Position memorization or recall of a memorized position is not possible

Proceed to "Power Mirror Surface Position is not Memorized"

Reverse shift-linked function of power mirrors does not operate

Proceed to "Reverse Shift-linked Function of Power Mirrors does not Operate"

Reverse shift-linked function of power mirrors does not return

Main body ECU (Multiplex network body ECU)

Driver side reverse shift-linked function of power mirrors does not return

Outer rear view mirror assembly LH

Outer mirror control ECU assembly LH

Front passenger side reverse shift-linked function of power mirrors does not return

Outer rear view mirror assembly RH

Outer mirror control ECU assembly RH

Memorization of the reverse shift-linked mirror position is not possible

Outer mirror control ECU assembly LH

Outer mirror control ECU assembly RH

Wireless transmitter memory function does not operate

Smart access system with push-button start (for Entry Function)

Power door lock control system

Front power seat control system

Main body ECU (Multiplex network body ECU)

Wireless-linked return function does not operate

Smart access system with push-button start (for Entry Function)

Wireless door lock control system

Front power seat control system

Main body ECU (Multiplex network body ECU)

Automatic glare-resistant EC mirror does not operate

Inner rear view mirror assembly

Outer mirror LH

Outer mirror RH

Outer mirror retractor LH

Outer mirror retractor RH

Outer mirror control ECU assembly LH

Outer mirror control ECU assembly RH

Harness or connector

-

  • *: w/ Windshield Deicer System

READ NEXT:

 Terminals Of Ecu

TERMINALS OF ECU CHECK OUTER MIRROR CONTROL ECU ASSEMBLY LH (a) Disconnect the M5 ECU connector. (b) Measure the voltage and resistance according to the value(s) in the table below. Tester Connect

 Data List / Active Test

DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. Th

 Driver Side Power Mirror cannot be Adjusted with Power Mirror Switch

DESCRIPTION When the outer mirror switch assembly mirror surface adjust switch (up/down/left/right) is operated, up/down/left/right signals are received by the main body ECU (multiplex network body EC

SEE MORE:

 Lost Communication with Multi-axis Acceleration Sensor Module Missing Message (U012587,U012987,U014087,U029387)

DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from U012587 Lost Communication with Multi-axis Acceleration Sensor Module Missing Message Communication stop occurs between the forward recognition camera and airbag ECU assembly continuously for 5

 Removal

REMOVAL CAUTION / NOTICE / HINT PROCEDURE 1. REMOVE ELECTRIC POWER STEERING COLUMN SUB-ASSEMBLY Click here 2. REMOVE POWER STEERING ECU ASSEMBLY (a) Detach the claw and remove the power steering ECU protector from the power steering ECU assembly. (b) Remove the 2 cable ties and h

© 2016-2024 Copyright www.lexunx.com