Lexus NX: Drivetrain
Lexus NX Service Manual / Drivetrain
- Axle And Differential
- Axle System
- Front Axle Hub
- Front Axle Hub Bolt
- Rear Axle Carrier
- Rear Axle Hub
- Rear Axle Hub Bolt
- Steering Knuckle
- Drive Shaft / Propeller Shaft
- P314 (hybrid Transmission / Transaxle)
READ NEXT:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of pr
SEE MORE:
Removal
REMOVAL PROCEDURE 1. REMOVE FRONT WHEEL RH Click here 2. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY RH HINT: Use the same procedure described for the LH side. Click here 3. REMOVE NO. 1 MOULDING TAPE HINT: Use the same procedure described for the LH side. Click here 4. REMOVE NO. 2 MOULDING TAP
Installation
INSTALLATION PROCEDURE 1. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY (a) Attach the 12 clips to install the back door outside garnish sub-assembly. (b) Install the 4 bolts. Torque: 5.0 N·m {51 kgf·cm, 44 in·lbf} 2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY Click here 3. INSTALL
© 2016-2026 Copyright www.lexunx.com
